搜索资源列表
msp430制作呼吸灯的程序
- msp430制作呼吸灯的程序，线性法。
breathLight
- s12xs芯片实用的呼吸灯程序，灯的亮度随着时间变化，默认PORTB接了led灯-chip s12xs practical procedures to breathe light, lamp brightness changes with time, the default then the led lights PORTB
huxideng_f020_OK
- 一个简单的呼吸灯程序，用c8051f020单片机，采用pwm调整占空比来实现-A simple breathing light program, with c8051f020 single chip, using pwm adjust the duty cycle to achieve
PFC8591
- 基于51单片机的FPC8591 DA/AD 呼吸灯程序-Based on 51 MCU FPC8591 DA/AD respiratory Chase
PWM输出实验
- 通过数据手册对单片机的IO口进行PWM测试，首先该IO口要有时钟信号，然后再程序中设置频率，即可以看到呼吸灯；也可用示波器测试，得到方波。(Through the data manual, PWM test on the IO port of the microcontroller, first of all, the IO port to have a clock signal, and then set the frequency
至简设计法--特效呼吸灯
- 特效呼吸灯 工程说明 本模块的功能要求是，实现8个灯前1s慢慢变暗，后1s慢慢变亮，不断重复以上操作。 案例补充说明 呼吸灯效果的LED每时每刻都在以不同的功率工作，以不同的亮度值拟合亮度变化，从而形成非常平顺柔和的灯光特效。亮度变化实际上是通过占空比的变化周期来确定的。占空比通过cnt2的计数来变换，而每次变化为1ms，因此PWM的周期是1ms。(Special effects breathing lamp Engineering
huxideng
- 呼吸灯的verilog程序，打开可用，记得改板子的型号(you could use the demo ,and don't forget to change the equipment)
多路驱动呼吸灯
- 该程序通过生成多路PWM波驱动多个呼吸灯(Drive multiple breathable lights)
呼吸灯
- 呼吸灯的小程序，PWM控制，实现小灯亮灭(LED light and dark test pass)
呼吸灯
- 基于51单片机的呼吸灯,呼吸频率可调整，硬件简单。(C51 breathing light ,LED indicator)
STM8S003F3通过PWM波实现三基色呼吸灯程序
- STM8S003通过PWM实现呼吸灯(Display Breathing light Using PWM Of STM8S003)
呼吸灯
- 呼吸灯 最简单的呼吸灯原理设计程序 新手可以尝试制作(Respiratory light the simplest principle of the design of respiratory lights, novice can try to make)
呼吸灯
- 采用定时器中断模仿生成PWM波，形成呼吸效果(Analog PWM wave generated by timer interrupt to form respiratory effect)
STM8S105呼吸灯_PWM输出
- STM8S105呼吸灯_PWM输出程序,IAR平台(STM8S105 breathing lamp _PWM output program, IAR platform)
breathe bulb
- 呼吸灯小程序改编，stm32入门小程序联系。(breathe bulb Breathing light applet, stm32 starter applet.)
msp430f2553的呼吸灯程序
- msp430f2553的呼吸灯程序，已经调通，开发平台为IAR(Msp430f2553's breathing lamp program has been adjusted, and the development platform is IAR)
15、呼吸灯
- 呼吸灯 51单片机控制 是LED循环亮灭，单片机的基础入门程序(Breathing and breathing lamp 51 MCU control is the LED cycle, and the basic entry program of SCM.)
STC15F104W三色呼吸灯
- 这是Keil编译的STC15F104W单片机三色呼吸灯C程序。(This is Keil compiled STC15F104W microcontroller three color breathing lamp C program.)
Breathing LED
- msp430g2553 launchpad的可控呼吸灯程序，只有一个按键所以只能调快(Msp430g2553 launchpad's controllable breathing lamp program has only one button, so it can only be adjusted quickly)
STM32F103C8T6 的MINI板程序开发笔记和例程序
- 高级例程-基于MINI板的 呼吸灯效果 采用TIM1的PWM实现；基本例程-USART收发；基于STM32的USB程序开发笔记(Advanced routine - the effect of breathing lamp based on mini board is realized by TIM1 PWM)