搜索资源列表
LCD_Demo_jlink
- 基于LPC2368的LCD控制程序,同时有Jlink下的调试配置-LPC2368 based on the LCD control procedures, at the same time has under the debug configuration Jlink
lpc2368_usbhid
- ARM LPC2368的USBHID程序 Keil uVision II 工程~!-ARM LPC2368 procedures USBHID the Keil uVision II works ~!
lpc2368kit_port
- LPC2368Kit 开发板的UCOS移植!今天终于在从这个论坛上下载的LPC214X的UCOS移植代码的基础上,自己做了一些修改,把UCOS-II移植到LPC236X Kit开发板上。编译环境:KEIL FOR ARM,上传上来供大家一起研究。 by silentdawn www.mcu123.net-Development board LPC2368Kit transplantation of uCOS! Today final
MCB2300_SD_File
- 利用LPC2368实现的SD卡文件系统源代码,可以加载到自己的基于NXP公司的LPC2368芯片的应用项目中-LPC2368 realize the use of the SD card file system source code can be loaded into its own based on NXP
USBMem_lpc2368
- lpc2368平台上的USB接口采用RAM虚拟作为U盘的的源程序,提供了一个U盘开发所需要的源码-lpc2368 platform USB interface uses a virtual RAM disk as the source U, U disk provide a needed source development
fft_LL_Final
- 在LPC2368上实现的FFT程序,通过AD1674采集数据,LPC2368完成了FFT运算,通过LCD显示频率及功率。-LPC2368 achieved in the FFT process, through the AD1674 data collection, LPC2368 completed FFT computation, through the LCD display the frequency and power.
Key
- 在LPC2368下,采用定时器3中断作为键盘扫描时间间隔,因此此键盘扫描函数不需要死循环实现抗抖动延时-In the LPC2368, the use of timer 3 as a keyboard interrupt scanning time interval, so the keyboard scanning function does not need to die to achieve anti-jitter delay c
St7529
- St7529液晶模块在LPC2368下的驱动程序及基本显示-St7529 LCD module in the driver under the LPC2368 and the basic display
hplip-2.7.12.tar
- HP Deskjet D2368驱动,可以驱动任何HP 的打印机-HP Deskjet D2368 driver can drive any HP printer
Http_demo
- LPC2368 网络服务器程序,具体请查看www.elechome.com-LPC2368 network server program, specifically Please check www.elechome.com
TFTP_demo
- LPC2368 TFTP测试程序,具体请查看http://www.elechome.com/-LPC2368 TFTP test procedure, the specific please check http://www.elechome.com/
SD_File
- LPC2368 SD卡控制程序,带文件系统,具体请查看http://www.elechome.com/-LPC2368 SD card control procedures, with the file system, specifically Please check http://www.elechome.com/
UART
- UART for LPC2368 有相关头文件PLL设置,这个是2368的关键,时钟频率以及系统频率的设置,是一个简单但是精辟的源代码-UART for LPC2368 header files related PLL settings, this is the key to 2368, the frequency of the clock frequency and system settings, is a simple but b
ADC
- LPC 2368 ADC Sample Program
lpc2368_can
- LPC2368(2368)的CAN 总线驱动的示例程序-LPC2368 (2368) the can bus driver sample programs
UCOSLPC2378
- ucos2.86版本,用在LPC 2368上,包括串口等.-ucos2.86 version, used in the LPC 2368, including the serial port and so on.
LPC2368Kit_PORT
- LPC 2368 Kit_ PORT ucos ii -LPC2368Kit_PORT ucos ii
an_po_mcu_apl
- h8s/h8c 2368 flash 例子,包括很多硬件访问-h8s/h8c 2368 flash examples, including many hardware access
LPC2368_SSP
- 周立功LPC23XX标准程序,SSP程序测试,2368测试没有任何问题。-ZLG LPC23XX standard procedure, SSP program testing, 2368 tests without any problems.