搜索资源列表
exam4_1
- 求解受纯弯曲的梁采用矩形单元计算各点位移的matlab算例程序-Solving subjected to pure bending beam with a rectangular unit calculates the displacement of each point matlab example programs
examples
- 端部受剪力的圆截面悬臂梁通过等参数单元计算圆筒的位移和内力分布的matlab算例，采用14点的irons积分公式计算刚度矩阵，节点应力采用绕节点平均法-By the end of the circular cross-section cantilever shear parameters such as unit calculates the cylinder through displacement and force distrib
pingmianlangdanyuan
- 用matlab进行平面梁端元的求解，并输出单元节点位移。-Using matlab for solving end-plane beam, and an output unit nodal displacements.
element
- 有限元二维三维梁材料单元，仅供科研用途，拒绝商业使用-2D and 3D finite element beam material element, for scientific purposes, refusing commercial use
beamWithHinges
- 有限元塑性铰梁材料单元，仅供科研用途，拒绝商业使用-Finite element plastic hinge beam material element, for scientific purposes, refusing commercial use
MoTaiFenXi
- !=== ====三维实体悬臂梁求解========== !初始化环境 finish /clear /FILNAME,SOLD3D,1 /TITLE,3D SOLID XuanBiLiang /prep7 !进入前处理 !=====设置单元和材料 ET,1,SOLID45 !定义单元类型(SOLID45)-! ========== Solving the three-dimensional solid c
PlaneFrameforF90
- 本程序可以处理由梁组成的刚架在多种工况（集中荷载、均布荷载、支座沉 降）下的线性静力平衡问题。 简易平面刚架静力计算程序，适合有限元/结构力学初学者使用本程序与平面问题单元思路基本一样，主要不同之处有耦合位移处理、等效荷 载处理、杆端力计算。 -The program can handle fr a me consisting of beams in a variety of conditions (concentrat
stiffness-matrix-MATLAB
- 1.计算梁的刚度矩阵 2.高斯积分 3.T3单元的刚度矩阵-1. Calculate the beam stiffness matrix 2. Gaussian integral 3.T3 element stiffness matrix
FEM_BEAM
- 可计算梁结构固有频率、振型、特征值对单元刚度的敏感度-It can calculate the beam structure s natural frequency, mode shapes, eigenvalues sensitivity of element s stiffness
examples
- 基于matlab编写的有限元程序 包含平面梁杆单元空间结构等 进攻参考学习-Matlab prepared based on the finite element program contains stem cells space plane beam structure learning offensive reference
ansys
- ansys壳单元分析箱梁的命令流，可修改箱梁参数-ansys shell command stream analysis of box girder, box girder parameters can be modified
TriFem
- 悬臂梁三角形单元集中荷载作用下端部位移，适用一般单元-悬臂梁三角形单元集中荷载作用下端部位移，适用一般单元 悬臂梁三角形单元集中荷载作用下端部位移，适用一般单元 The displacement of the lower part of the cantilever beam triangular element under concentrated load is suitable for the general elemen
FEM-MATLAB(75)
- matlab有限元编程75个案例，梁、板等结构，三角形，四边形等单元-matlab finite element program 75 cases, all very powerful, just always just a single
beam_displacement
- 进行了简支梁荷载作用下的变形计算，将梁分成了40个单元，分别用Euler Bernoulli和Timoshenko 梁进行了对比计算-Was calculated deformation under loads simply supported beam, the beam is divided into 40 units, respectively Euler Bernoulli and Timoshenko beam compare
Matlab tools_finite element analysis
- 可进行进行小型模型的有限元分析，包括了杆、梁、面、体等单元，并配有计算实例，可进行静力分析、动力分析和非线性分析。(The finite element analysis of the small model can be carried out, including the elements of the rod, beam, surface and body, and with examples of calculation, wh
continuous_girder_bridge
- 基于大型商业有限元软件ANSYS，采用beam单元建立的连续梁桥模型(Based on the large commercial finite element software ANSYS, a continuous beam bridge model is established by using the beam unit)
tri-elements
- 本程序实现了一悬臂梁受力问题的有限元解法，采用三节点三角形单元，计算了梁端部受集中力和同时受均布荷载以及端部集中力两种情况，给出了计算结果并作出了变形图示(This program implements a cantilever beam finite element problem solution, using three node triangular element. Two cases: concentrated force
finite element
- 在matlab中，采用矩形单元计算纯弯梁的变形，研究对象是一承受纯弯曲的梁(The rectangular element is used to calculate the deformation of pure curved beam. The object of study is a beam subjected to pure bending. The length width height is 9*6*1cm. Due to
有限元求转子临界转速
- 通过有限元法求解柔性支撑的铁木辛柯梁的固有频率，包含各个单元的组装，固有频率的计算！！！！！！！！！！！！！！！！！！(Through finite element method, the natural frequency of the flexible support is solved, including the assembly of each unit and the calculation of the natural f
Beam1D2Node
- Matlab编写的梁杆单元的有限元分析，分析应力、应变。(The finite element analysis of beam column element written in Matlab is used to analyze stress and strain.)