搜索资源列表
超声波测速1602(2)
- 利用超声波模块加上STC89C52RC单片机进行测距(Use ultrasonic module and STC89C52RC singlechip for ranging)
HCSR04超声波stm32库函数
- 利用HCSR04超声波模块实现测量距离,有效测距范围约为4到35cm(Using HCSR04 ultrasonic module to realize range finding)
超声波测距
- 程序包含使用c51通过超声波模块测距并且在数码管上显示测量的距离(The program contains the distance of the measurement by using the c51 through the ultrasonic module and the measurement on the digital tube)
超声波测距程序
- 本源程序为超声波测距程序,利用超声波模块进行距离探测,利用温度补偿,液晶显示距离探测值,进行距离分段控制,适合做与距离相关的项目参考(Source program for Ultrasonic Ranging procedures, the use of ultrasonic modules for distance detection, the use of temperature compensation, liquid cryst
超声波
- 普通的超声波模块,用数码管显示距离,范围2cm——300cm(Ordinary ultrasonic module, with digital display distance, range 2cm - 300cm)
超声波测距(数码管显示)
- 利用超声波模块测量距离并显示在四段数码管上(Use ultrasonic module to measure distance and display on four section digital tube)
UltrasonicWave
- 超声波模块驱动程序 (基于stm32)(Ultrasonic module driver)
超声波测距
- 超声波模块,可以精确的显示出距离,LCD屏幕显示,里面有51,和ARM的程序。等审核人员审核完成(Ultrasonic module, can accurately display the distance, LCD screen display, there are 51, and ARM program. Audit personnel audit completed)
7.超声波测距_PCA
- 基于stc15f2k60s2的超声波程序,使用sr-04经典超声波模块。使用的是stc15的pca中输入捕获功能,实现对超声波的距离的测量,使用数码管显示程序。(Based on stc15f2k60s2 ultrasonic program, using sr-04 classic ultrasonic module. The use of stc15 PCA input capture function, the realizati
超声波测距
- 通过超声波模块与单片机连接,进行测距。超声波测距原理是在超声波发射装置发出超声波,它的根据是接收器接到超声波时的时间差,与雷达测距原理相似。 超声波发射器向某一方向发射超声波,在发射时刻的同时开始计时,超声波在空气中传播,途中碰到障碍物就立即返回来,超声波接收器收到反射波就立即停止计时。(The ultrasonic module is connected with the microcontroller to measure the
超声波测距
- 通过超声波模块测出距离,小于安全距离时,蜂鸣器发声(The buzzer is sound when the distance is measured by the ultrasonic module, less than the safe distance.)
超声波测距
- 基于stm32的超声波模块HC-RS04测距(STM32 based ultrasonic module HC-RS04 distance measurement)
US100例程资料
- 超声波模块us100在51单片机的应用,和超声波模块的51单片机源码(The application of the ultrasonic module US100 in 51 single chip microcomputer and the source code of the 51 single chip of the ultrasonic module)
超声波模块程序_STM32F103ZET6
- stm32超声波测距驱动程序,使用正点原子战舰V3开发板(STM32 ultrasonic distance measuring driver)
超声波测距
- 用stm32f103对一个超声波模块进行操作,算出要测量的距离(Use STM32F103 to operate an ultrasonic module and calculate the distance to be measured)
HCSR04超声波模块stm32寄存器版
- 用stm32的定时器去读超声波的检测距离,用的是寄存器版本可以快速上手(Using the STM32 timer to read the detection distance of the ultrasonic wave the register version can be used quickly.)
超声波测距
- 使用超声波模块,可在1602上显示距离,keil5打开 ,亲测可用。(Ultrasound wave module can be used to display the distance on 1602,Keil5 open, pro test available.)
STM32超声波测距
- STM32超声波模块测距功能实现,基于STM32F103ZET6,管脚可以修改(The realization of the range finder function of STM32 ultrasonic module)
超声波模块程序_STM32F103ZET6
- 超声波原理简单测距准确,应用广泛下面贴一个自己写的数码管程序,显示部分需要改,最近比赛写的我使用的是慧净开发板,共阴数码管(Ultrasonic distance measurement)
超声波测距LC1602显示
- 【Realplay】HC-SR04 超声波模块测距程序 并用1602液晶显示被测距离(HC-SR04 ultrasonic module range finder program)