资源列表

« 1 2 ... .49 .50 .51 .52 .53 2254.55 .56 .57 .58 .59 ... 216382 »

[Windows编程复化Simpson公式法----matlab

说明:复化Simpson公式法----matlab,勇于离散积分方程,助于勇于工程反问题的计算,适合于算例仿真。(Complex Simpson formula ---- matlab, the courage to discrete integral equation, help to the courage to reverse the calculation of the project, suitable for example si
<立军 > 在 2025-05-31 上传 | 大小:9kb | 下载:0

[嵌入式/单片机编程输入捕获实验

说明:本实验利用TIM5_CH1来做输入捕获,我们将捕获PA0上的高电平脉宽,并将脉宽时间通过串 口打印出来,大家可以通过按WK_UP按键,模拟输入高电平。同时,本实验将保留上一个实 验的PWM输出,DS0还是会由暗-->亮的循环变化,大家可以通过杜邦线连接PA0和PB5,来观 测PWM输出的高电平时间。(STM32 input capture program)
<小寒@123 > 在 2025-05-31 上传 | 大小:282kb | 下载:0

[多媒体jianche

说明:用于车辆检测的自编程序,main为主函数(For vehicle detection of self programmed, main as the main function)
<长江七号 > 在 2025-05-31 上传 | 大小:24.14mb | 下载:0

[其他嵌入式/单片机内容stm32f10x_stdperiph_lib(库函数)

说明:整理好的stm32函数库,其中已经模块化,在使用的时候可以直接调用,对初学者来说,是一个不错的参考资料。(November 24, 2012-the design DOCUMENTS, format of PROTEL99 schematic diagram and pcb diagram, convenient you own design of the circuit board (LQFP100 package, compatib
<薛庆霞 > 在 2025-05-31 上传 | 大小:42.31mb | 下载:0

[界面编程cry-drive

说明:硬盘控制源程序,用C编写的,很简短明了,也是很实用的,可以参考一下,(Hard drive control source code, written in C, very short and clear, also is very practical, can consult,)
<geprtsidt > 在 2025-05-31 上传 | 大小:6kb | 下载:0

[多媒体程序

说明:jianche.m 视频追踪主程序,读取视频 先读取监控视频,对每一帧进行救护车识别,保存每一帧处理的结果,运行时候需要修改。 比如:imwrite(uint8(Formerfr a me1),strcat('E:\车辆追踪\跟踪\',num2str(k),'.jpg')) 需要自己重新定义文件夹,对每一帧结果进行保存(Jianche.m video tracking main program, read video F
<长江七号 > 在 2025-05-31 上传 | 大小:40.57mb | 下载:0

[matlab例程CS_SAR

说明:合成孔径雷达仿真程序,包括回波仿真,使用调频变标算法(Synthetic aperture radar simulation program, including echo simulation, the use of FM scaling algorithm)
<Arcon > 在 2025-05-31 上传 | 大小:3kb | 下载:0

[其他小程序su_coarry

说明:互质MIMO阵列的DOA估计,同时含有蒙特卡洛计算误差。(DOA estimation based on MIMO.)
<dryna > 在 2025-05-31 上传 | 大小:1kb | 下载:0

[matlab例程RD_SAR_large_squint

说明:大斜视条带合成孔径雷达仿真程序,包括回波仿真(Large squint synthetic aperture radar simulation program, including echo simulation)
<Arcon > 在 2025-05-31 上传 | 大小:5kb | 下载:0

[进程与线程0718821

说明:矩阵运算加减点乘点除,脚本解析(不含语法检查),纯c程序练手而已(Matrix operations and subtract point by point, scr ipt analysis (excluding syntax check), pure c program a try)
<Virginia > 在 2025-05-31 上传 | 大小:9kb | 下载:0

[其他小程序oblique_projection

说明:通过斜投影对空间相干目标进行DOA估计,非相干信号通过MUSIC算法估计,然后斜投影估计相干信号DOA。(DOA estimation of spatially coherent targets is made by oblique projection, and the incoherent signals are estimated by MUSIC algorithm, and then the oblique projectio
<dryna > 在 2025-05-31 上传 | 大小:1kb | 下载:0

[行业应用软件断面LSP

说明:聚合了绘制断面的几种方法,应用时输入相应命令调用。(Several methods of drawing sections are aggregated, and the corresponding commands are invoked when applied.)
<寡人无极 > 在 2025-05-31 上传 | 大小:1kb | 下载:0
« 1 2 ... .49 .50 .51 .52 .53 2254.55 .56 .57 .58 .59 ... 216382 »

源码中国 www.ymcn.org