资源列表

« 1 2 ... .91 .92 .93 .94 .95 996.97 .98 .99 .00 .01 ... 1228 »

[串口编程Beierguanbiduankou

说明:贝尔7353批量或者单个关闭端口,查看端口状态,很实用-Bell 7353 batch or single shut down the port, check the port status, it is practical
<安继业> 在 2025-07-06 上传 | 大小:1kb | 下载:0

[串口编程SCIFIFOINTtext2

说明:本程序是上位机与DSP通讯,DSP以FIFO的接收中断方式接收上位机的数据,再将数据发回给上位机-This procedure is the communication between PC and DSP, DSP receiver FIFO interrupt to the host computer receives the data, then the data is sent back to the host computer
<mengjing> 在 2025-07-06 上传 | 大小:305kb | 下载:0

[串口编程tcp

说明:主要用于计算机之间的连接通信,运用的是TCP协议-Mainly used for communication between computers connected to, the use of the TCP protocol
<朱祖灿> 在 2025-07-06 上传 | 大小:84kb | 下载:0

[串口编程UART

说明:用verilog编写的UART串口通信程序,经验证误码率为0,系统由ARM控制FPGA的串口进行通信;-Written in verilog UART serial communication procedures, proven error rate is 0, the system controlled by ARM FPGA serial communication
<lejing> 在 2025-07-06 上传 | 大小:3kb | 下载:0

[串口编程PCserial-communication

说明:设计一个与PC串口通信的实验系统,当在PC机上输入十进制数时,可在实验板上显示相应的十六进制数字,而在实验板上按下独立按键A时,在PC机上也可以显示其对应的管脚数56。-Design an experiment with the PC serial communication system, when the PC input decimal number, you can experiment on-board display the corresponding hexadecimal num
<张三> 在 2025-07-06 上传 | 大小:145kb | 下载:0

[串口编程SerialPort

说明:串口通信类,轻松实现串口通信,强烈推荐使用-Channeling port communications
<heshan> 在 2025-07-06 上传 | 大小:8kb | 下载:0

[串口编程Cp2Bp2BP

说明:VC串口通讯 多线程串口通讯 串口实现双机互联-VC serial communications multithreading serial communication port to achieve dual-Internet
<wangwei> 在 2025-07-06 上传 | 大小:13.5mb | 下载:0

[串口编程ECOMsrc

说明:串口调试工具,串口调试代码,串口工具,串口调试助手,串口助手-Serial debugging tools, serial debugging code, serial tools, serial debugging assistant, assistant serial
<白桦> 在 2025-07-06 上传 | 大小:1.38mb | 下载:0

[串口编程SCOMMV23

说明:一个功能比较全面的串口调试工具。你值得拥有。-A more comprehensive functional serial debugging tools. You deserve.
<李吉昌> 在 2025-07-06 上传 | 大小:76kb | 下载:0

[串口编程PLM_Basic_Command_Set

说明:insteon示例控制代码,包括最基本的消息发送代码,譬如开灯,关灯的控制-insteon sample control code, including the most basic messaging code, for example, turn on the lights, turn off the lights to control
<Human> 在 2025-07-06 上传 | 大小:1kb | 下载:0

[串口编程LsCommDemo

说明:这是一个Win32 API的打包类,对处理串口的Win32 API类进行了封装,借助这个类可以很方便地对串口进行操作。 特性: 1、C++接口简洁易用。 2、使用C++异常时,首选 Win32 常规的返回值机制。保证使用CSerialPort的代码更加健壮。 3、支持UNICODE,支持MFC静态链接并且所有代码都在 warning level 4 级别上进行洁净编译。 4、支持串口模块使用重叠、阻塞和回调(只能在NT中使用) -This is a Win32 API
<zfcx1688> 在 2025-07-06 上传 | 大小:361kb | 下载:0

[串口编程serialport

说明:实现了一个简洁易用的多线程串行通讯接口,可以切换查询和自动接收模式,进行对串口数据收发.-Implements a simple-to-use multi-threaded serial communication interface, you can switch query and automatic reception mode for the serial data transceiver.
<zfcx1688> 在 2025-07-06 上传 | 大小:17kb | 下载:0
« 1 2 ... .91 .92 .93 .94 .95 996.97 .98 .99 .00 .01 ... 1228 »

源码中国 www.ymcn.org