资源列表

« 1 2 ... .53 .54 .55 .56 .57 1058.59 .60 .61 .62 .63 ... 1228 »

[串口编程MAPIConnect

说明:内有功能说明,已经在使用中,很正常,我发的软件都是用于通讯功能的
<藏医生> 在 2008-10-13 上传 | 大小:1.9mb | 下载:0

[串口编程VC++ComPortDesign

说明:< Visual C++/Turbo C串口通信编程实践>>第二版光盘资料.
<renxiong> 在 2008-10-13 上传 | 大小:1.9mb | 下载:0

[串口编程移动终端模块VC编程

说明:GSM模块通过串口与电脑进行通信,在PC端用VC编程,实现对GSM模块的控制。
<501849610@qq.com> 在 2011-05-06 上传 | 大小:1.9mb | 下载:1

[串口编程SCommTest(20051218)

说明:串口发送接收程序,需要注意的是:设置好相应的串口参数 VC+ WINXP OK-Send serial port to receive the procedure needs to pay attention to is this: set up the serial parameters VC+ WINXP OK
<梁杉> 在 2025-06-14 上传 | 大小:1.9mb | 下载:0

[串口编程SCommTest1

说明:该源代码主要是实现串口通信,并将所传输的内容实现保存。-The source code is mainly realize serial communication, and the transmission of content preservation.
<柳庆勇> 在 2025-06-14 上传 | 大小:1.9mb | 下载:0

[串口编程MAPIConnect

说明:内有功能说明,已经在使用中,很正常,我发的软件都是用于通讯功能的-There are functions that have been in use, normal, I made the software are used for communication
<藏医生> 在 2025-06-14 上传 | 大小:1.9mb | 下载:0

[串口编程chuankoutongxin

说明:C++编的串口通信程序,能够实现主机和PLC等设备的串口通信-C++ Series serial communication program, to achieve the host and the PLC, such as equipment serial communication
<jinxin> 在 2025-06-14 上传 | 大小:1.9mb | 下载:0

[串口编程cloudtour

说明:云台控制系统PELCO-D\ PELCO-P -cloud tour, PELCO-D\PELCO-P.
<chen> 在 2025-06-14 上传 | 大小:1.9mb | 下载:0

[串口编程VC_MOD

说明:利用VC++编写的modbus协议程序,经过了调试,分享出来,共大家学习。不足之处,欢迎赐教-Using VC++ program written in modbus protocol, after commissioning, sharing out of all learning. Inadequate, please enlighten
<lili> 在 2025-06-14 上传 | 大小:1.9mb | 下载:0

[串口编程SERIALCHECK

说明:使用VC程序编写的可以用来检查串口运行情况的程序,程序设定的接受串口号为1-Programming using VC serial port can be used to check the operation of the program, the program set to accept the serial number is 1
<叶超> 在 2025-06-14 上传 | 大小:1.9mb | 下载:0

[串口编程temp

说明:本程序实现了通过串口 访问数据 实时显示温度 显示 温度曲线图 还可以回放历史数据-Realized by the serial port to access the data through real-time display shows the temperature curve temperature can also play back historical data
<刘剑> 在 2025-06-14 上传 | 大小:1.9mb | 下载:0

[串口编程SCommT

说明:基于VC++的串口通信程序,实现简单的串口数据的接受和发送,基于MSCOMM空间-Based on VC++ of serial communication programs achieve simple serial data and acceptance of sending, based on MSCOMM space
<刘丽> 在 2025-06-14 上传 | 大小:1.9mb | 下载:0
« 1 2 ... .53 .54 .55 .56 .57 1058.59 .60 .61 .62 .63 ... 1228 »

源码中国 www.ymcn.org