资源列表

« 1 2 ... .64 .65 .66 .67 .68 1769.70 .71 .72 .73 .74 ... 2739 »

[微处理器(ARM/PowerPC等)FFT2410_ASM

说明:汇编的LED的闪烁,完成ARM9处理器S3C2410开发板初始化,LED实验。-FFT2410_ASM, compiled by the LED flashes complete ARM9 processor S3C2410 development board initialization, LED experiment.
<袁野> 在 2025-09-17 上传 | 大小:13kb | 下载:0

[微处理器(ARM/PowerPC等)FFT2410_dma

说明:DMA的搬移程序:原地址0x31000000, 目的地址0x30800010,查看原地址的数据是否已经拷贝到目的地址,S3C2410开发板。-DMA' s move program: the original address 0x31000000, destination address 0x30800010 View original address data has been copied to the destination address, the S3C2410 developm
<袁野> 在 2025-09-17 上传 | 大小:62kb | 下载:0

[微处理器(ARM/PowerPC等)fft2410-lcd

说明:S3C2410开发板,LCD 连续出现四幅画面,从串口中可以看到提示信息。-S3C2410 development board, LCD consecutive four screen appears, and you can see the message from the serial port.
<袁野> 在 2025-09-17 上传 | 大小:933kb | 下载:0

[微处理器(ARM/PowerPC等)interfacing_drivers

说明:these files are drivers of main code. Just include thest files to main and call them.
<omkar> 在 2025-09-17 上传 | 大小:7kb | 下载:0

[微处理器(ARM/PowerPC等)W5100_AD5724_EXSRAM_AD7606

说明:STM32F207 on the W5100, AD5724, the AD7606 s driven development
<王瑞清> 在 2025-09-17 上传 | 大小:9.88mb | 下载:0

[微处理器(ARM/PowerPC等)uart

说明:使用keil for arm 和proteus联调的适合飞利浦公司的LPC2124的串口通信UART的程序,自己测试过,保证能够运行-Keil for arm proteus FBI Philips LPC2124 serial communication UART program, tested to ensure the ability to run
<lqy> 在 2025-09-17 上传 | 大小:90kb | 下载:0

[微处理器(ARM/PowerPC等)M24C08_EEPROM

说明:stm32 i2c EEPROM test
<truesoft> 在 2025-09-17 上传 | 大小:12kb | 下载:0

[微处理器(ARM/PowerPC等)chaoshishoufei

说明:超市收费系统-微机接口课设-条形码检测-嵌入式-Supermarket toll system- computer interface class-based- barcode detection
<陈楚楚> 在 2025-09-17 上传 | 大小:357kb | 下载:0

[微处理器(ARM/PowerPC等)FPGA18B20

说明:FPGA控制1602实时显示,很好的例程,很详细-FPGA to control the 1602 real-time display, a good routine, very detailed
<谷浩轩> 在 2025-09-17 上传 | 大小:248kb | 下载:0

[微处理器(ARM/PowerPC等)74HC138

说明:1 3 8 译码器实验,这个是单片机51系列写的- 138 decode use for 51 mcu
<韦小宝> 在 2025-09-17 上传 | 大小:1kb | 下载:0

[微处理器(ARM/PowerPC等)4

说明:单片机实验 工业顺序控制实验 k1为启动开关 k2为故障输入模拟开关 p.3.3输入0是不断报警 p1.7为报警声音输出-SCM experiment industrial control experiment in order k1 the start switch k2 the fault input analog switch p.3.3 input is constantly alarm p1.7 alarm sound output
<张广新> 在 2025-09-17 上传 | 大小:1kb | 下载:0

[微处理器(ARM/PowerPC等)Kinetis_nfc

说明:飞思卡尔Kinetis单片机NAND闪存驱动-Freescale Kinetis ARM Cortex-M4 NAND Flash driver.
<Alex> 在 2025-09-17 上传 | 大小:4kb | 下载:0
« 1 2 ... .64 .65 .66 .67 .68 1769.70 .71 .72 .73 .74 ... 2739 »

源码中国 www.ymcn.org