资源列表

« 1 2 ... .22 .23 .24 .25 .26 14627.28 .29 .30 .31 .32 ... 15240 »

[单片机(51,AVR,MSP430等)main

说明:用PWM方波调节LED亮度P1.1控制LED,低电平点亮K3和K4分别接在P3.4、P3.5,按下时为低电平按K3可调暗LED,按K4可调亮LED-PWM square wave with adjustable LED brightness control P1.1 LED, low light K3 and K4 are connected to the P3.4, P3.5, when pressed by K3 adjustable low dark LED, adjustable by
<kkkkk> 在 2025-08-15 上传 | 大小:1kb | 下载:0

[单片机(51,AVR,MSP430等)main

说明:这个实验中使用液晶扩展板(开发板)两个按键(S6、 S7)分别控制 CC2430 模块两个 LED灯闪烁或熄灭。 -This experiment using the LCD expansion board (board) two buttons (S6, S7), respectively, control the CC2430 module or two LED lights blink off.
<贾耀奇> 在 2025-08-15 上传 | 大小:1kb | 下载:0

[单片机(51,AVR,MSP430等)main

说明:用定时器 1 来改变小灯的状态,T1 每溢出两次,1 个 LED 灯闪烁,1 个 LED 灯改变当前 状态。 -Timer 1 with small lights to change state, T1 overflow twice each, an LED flashes, an LED light to change the current state.
<贾耀奇> 在 2025-08-15 上传 | 大小:1kb | 下载:0

[单片机(51,AVR,MSP430等)main

说明: 用定时器 2来改变小灯的状态,T2每发生一次中断小灯改变状态一次。1 个 LED灯定时开 关,1 个 LED灯常亮。 -2 using the timer to change the status of a small lamp, T2 interrupt occurs once for every little light to change the status again. 1 LED light timer switch, an LED lights lit.
<贾耀奇> 在 2025-08-15 上传 | 大小:1kb | 下载:0

[单片机(51,AVR,MSP430等)main

说明: 用定时器 3来改变小灯的状态,T3每发生 200次中断小灯改变状态一次。1 个 LED灯常亮, 1 个 LED灯闪烁。 -3 with a timer to change the status of small lights, T3 occurred 200 times for every little light to change the status of an interrupt. 1 LED lights lit, an LED flashes.
<贾耀奇> 在 2025-08-15 上传 | 大小:1kb | 下载:0

[单片机(51,AVR,MSP430等)main

说明:用定时器 4来改变小灯的状态,T4每发生 200次中断小灯改变状态一次。-4 with a timer to change the status of small lights, T4 occurred 200 times for every little light to change the status of an interrupt.
<贾耀奇> 在 2025-08-15 上传 | 大小:1kb | 下载:0

[单片机(51,AVR,MSP430等)WAVE_TLC5615

说明:TLC5615 DA转换芯片的51单片机驱动程序,用于产生正弦波。-TLC5615 DA converter chip 51 chip driver, used to generate sine wave.
<mountain> 在 2025-08-15 上传 | 大小:1kb | 下载:0

[单片机(51,AVR,MSP430等)EXERCISE_5_MAX187_2

说明:MAX187 AD转换芯片的单片机驱动程序,数字量显示在8段段式液晶上。-MAX187 AD converter chip microcontroller drivers, digital LCD display on the stage at 8.
<mountain> 在 2025-08-15 上传 | 大小:1kb | 下载:0

[单片机(51,AVR,MSP430等)counteraLCD

说明:在新华龙C8051F040单片机BT F040 开发评估板上制作一个频率计 (硬件:C8051F040 + LV595 + 2*16 LCD) -Implement a frequency counter based on the BT F040 Development Kit from NewHuaLong CO.LTD. (hardware: C8051F040+ LV595+ 2* 16 LCD)
<小鸭子> 在 2025-08-15 上传 | 大小:1kb | 下载:0

[单片机(51,AVR,MSP430等)fet140_ta_24

说明:msp430x14x模数转换,用来控制msp430的LED灯闪烁-msp430x14x analog to digital converter, to control the LED light flashes msp430
<zhou> 在 2025-08-15 上传 | 大小:1kb | 下载:0

[单片机(51,AVR,MSP430等)bujingC

说明:简单设计步进电机的驱动C程序!方便调试和再添加学习!-Simple design stepper motor drive C program! Easy to debug and add learning!
<tufei> 在 2025-08-15 上传 | 大小:1kb | 下载:0

[单片机(51,AVR,MSP430等)jianpanC

说明:独立键盘在单片机上的一个实现。利用TIMER0中断,CPU在不停的扫描程序,60ms到,执行按键驱动,函数在48ms执行一次,60ms再次执行,避免了CPU资源的浪费。-Independent on the keyboard in a single-chip implementation. Use TIMER0 interrupt, CPU in constant scanner, 60ms that the implementation of key drivers, perform a fu
<tufei> 在 2025-08-15 上传 | 大小:1kb | 下载:0
« 1 2 ... .22 .23 .24 .25 .26 14627.28 .29 .30 .31 .32 ... 15240 »

源码中国 www.ymcn.org