资源列表
[uCOS开发] uc_51_small
说明:uc/osII基于51单片机的时钟-uc / 51 osII based MCU clock-uc/osII based on 51 single-chip clock-uc/51 osII based MCU clock<wfwef> 在 2025-07-25 上传 | 大小:172kb | 下载:0
[uCOS开发] smartarm2400
说明:smartarm2400开发平台配套例程 -development platform supporting routines smartarm2400 development platform supporting routines<王振举> 在 2025-07-25 上传 | 大小:11.88mb | 下载:0
[uCOS开发] touch
说明:基于ARM9-s3c2410的ucos-ii触摸屏使用源程序,使用之前需要正确配置了ADS1.2。否则无法编译通过,配置ADS1。2为ARM9的资料网上到处都是。-Based on the ARM9-s3c2410 touch screen ucos-ii the use of source code, the use of properly configured before the need ADS1.2. Otherwise it is impossible to compile thro<沈> 在 2025-07-25 上传 | 大小:192kb | 下载:0
[uCOS开发] API
说明:基于ARM9 S3C2410下ucos-II的基于lcd屏绘图API函数,需要正确设置ADS1.2下的配置否则无法编译通过,配置ADS1.2的文章网上有很多,参考下就可以了。-ARM9 S3C2410 based ucos-II under the lcd screen-based graphics API function, the need for the correct configuration settings of ADS1.2 otherwise it is impossible<沈> 在 2025-07-25 上传 | 大小:678kb | 下载:0
[uCOS开发] can
说明:基于ARM9 S3C2410下ucos-II的CAN总线驱动函数,需要正确设置ADS1.2下的配置否则无法编译通过,配置ADS1.2的文章网上有很多,参考下就可以了。-ARM9 S3C2410 based ucos-II under the CAN bus driver function, the need for the correct configuration settings of ADS1.2 otherwise it is impossible to compile through<沈> 在 2025-07-25 上传 | 大小:257kb | 下载:0
[uCOS开发] RS-485
说明:基于ARM9 S3C2410下ucos-II的RS485驱动函数,需要正确设置ADS1.2下的配置否则无法编译通过,配置ADS1.2的文章网上有很多,参考下就可以了。-ARM9 S3C2410 based ucos-II under the RS485 driver function, the need for the correct configuration settings of ADS1.2 otherwise it is impossible to compile through th<沈> 在 2025-07-25 上传 | 大小:301kb | 下载:0