资源列表
[其他嵌入式/单片机内容] fft
说明:可综合的C,实现可重构的2的任意次幂的FFT加速设计-C, can be integrated to achieve any power of reconfigurable FFT accelerate the design<田小新> 在 2025-06-08 上传 | 大小:5.41mb | 下载:0
[其他嵌入式/单片机内容] 1-wire
说明:Onewire library for Atmel AVR with DS18x20 support<Alex> 在 2025-06-08 上传 | 大小:88kb | 下载:0
[其他嵌入式/单片机内容] libftdi-0.18.tar
说明:FTDI USB chip library for embedded devices<Alex> 在 2025-06-08 上传 | 大小:389kb | 下载:0
[其他嵌入式/单片机内容] 514
说明:51单片机的应用,寄存器以及指令的应用,准确。以及编程的例子-51 microcontroller applications, register and instruction, and accurate.<五儿> 在 2025-06-08 上传 | 大小:809kb | 下载:0
[其他嵌入式/单片机内容] EmbeddedGUI-0.5.3
说明:Small GUI library for embedded usage<Alex> 在 2025-06-08 上传 | 大小:4.5mb | 下载:0
[其他嵌入式/单片机内容] UART
说明:该程序是430f149单片机串口通讯的程序,实例可直接测试。-The program is 430f149 single-chip serial communication procedures, examples can be tested directly.<lijun > 在 2025-06-08 上传 | 大小:25kb | 下载:0
[其他嵌入式/单片机内容] SPI
说明:实现两块STM32之间的SPI通信,并且存在对外部中断,串口中断的处理-Between two STM32 SPI communication, and there is an external interrupt, serial port interrupt processing<李斐> 在 2025-06-08 上传 | 大小:988kb | 下载:0
[其他嵌入式/单片机内容] Mini4Z-V0
说明:STM32F103CBT6 FreeRTOS, LED灯闪烁,串口中断接收,一个比较简单的FreeRTOS中断接收程序,上位机发送一组字符串,STM32返回相同的字符串-In STM32F103CBT6 FreeRTOS, LED light flicker, interrupt reception, a relatively simple FreeRTOS interrupt reception program, the PC sends a set of strings, STM32 ret<黄传龙> 在 2025-06-08 上传 | 大小:1.86mb | 下载:0
[其他嵌入式/单片机内容] ATMEGA8
说明:基于ATMEGA8单片机,在ICCV7环境下写的初始化移位寄存器输出一直输出一,同时,采集六路通道数据的程序。(可作为作为模块程序使用)-ATMEGA8 microcontroller, the the initialization write in ICCV7 environment shift register output has been output, six-channel data acquisition program. (As used as a module program)<张洧川> 在 2025-06-08 上传 | 大小:72kb | 下载:0
[其他嵌入式/单片机内容] maiboceshi
说明:基于单片机的脉搏测试,光敏传感器,测量一分钟内脉搏跳动的次数-Microcontroller-based pulse test, light sensors to measure the number of one minute pulse<zoe> 在 2025-06-08 上传 | 大小:560kb | 下载:0
[其他嵌入式/单片机内容] long
说明:本例程为四键控制时钟,k1键按下后进入时钟的调整状态,k2按下时钟上 k3按下时钟下调,调好设定的时钟后按下k4时钟进入走时状态-This routine four keys to control the clock, enter the clock adjustment of status in the k1 key is pressed, the K2 Press clock K3 press the clock down, press k4 clock into go after a go<sy> 在 2025-06-08 上传 | 大小:3kb | 下载:0