资源列表
[汇编语言] trafficlight
说明:这是基于实验板的一个关于交通灯模拟的汇编程序,用于8255A芯片-This is based on the experimental board, a simulation of traffic lights on the compilation process, for 8255A chip<王良> 在 2025-06-15 上传 | 大小:1kb | 下载:0
[汇编语言] serialtransmit
说明:这是用于8259A的关于串口通信的程序,一个是自发自收,另一个是双机发送的-This is for the 8259A on the serial communication procedures, a spontaneous self-admission, and the other is sent double<王良> 在 2025-06-15 上传 | 大小:3kb | 下载:0
[汇编语言] branch
说明:汇编程序的分支程序的设计 编写程序,将一个包含有20个数据的数组M分成两个数组:正数数组和负数数组N,并分别把这两个数组中的数据存储在数组M1和M2中。-Assembler branch design procedures programming, one containing 20 data array M is divided into two arrays: an array of positive and negative array N, and, respectively, thes<> 在 2025-06-15 上传 | 大小:4kb | 下载:0
[汇编语言] dealchar
说明:串操作指令的使用方法 编写程序,将数据段中BUF1为首地址的一组字数据传送到附加段中BUF2为首地址的内存区域,试用串操作指令编程。-String operation instructions to use the procedure to prepare the data in paragraph BUF1 address a group headed by the word data to the additional paragraph headed BUF2 address memory<> 在 2025-06-15 上传 | 大小:4kb | 下载:0
[汇编语言] interupte
说明:汇编程序的中断程序的设计方法 int 21H的1号、2号、9号功能的使用 使用21H中断的9号功能,输出提示信息,并使用1号功能从键盘输入2个小于10的数,计算其和,并将和存放在存储单元R中。-Assembler interrupt process design method int 21H 1, 2, 9, features the use of 21H interruption of function on the 9th, the output message, and use the 1<> 在 2025-06-15 上传 | 大小:4kb | 下载:0
[汇编语言] adc12_UART
说明:对于MSP430F169,采用单通道单次转换方式,对接口板上的一路模拟信号P6.0(0~3.3V可调电压)进行A/D转换,并将12位转换结果通过串口发到PC机,由PC机的串口助手显示出来。-For MSP430F169, the use of single-channel single conversion by means of an interface board all the way analog signal P6.0 (0 ~ 3.3V adjustable voltage) for<沈丽> 在 2025-06-15 上传 | 大小:1kb | 下载:0