资源列表
[软件工程] Automatic-shutdown-command-computer
说明:电脑自动关机命令Shutdown详解 目前实现自动关机的方法主要是使用第三方软件,比较麻烦。其实,Windows自身就具备自动关机功能,它是由系统内部的 "Shutdown.exe"升序来控制的,位于"C:/windows/System32"文件夹中。如果你想利用这项功能的话,请跟我来。-Automatic shutdown command Shutdown detailed computerIs the use of third party software realization met<yuhaijian> 在 2025-07-04 上传 | 大小:2kb | 下载:0
[软件工程] sniffer3-explain
说明:对于抓包软件的终极版,从网卡混杂模式下抓取其他主机的包进行分析处理。并且有过滤功能-Crawl under from the NIC in promiscuous mode packet capture software Ultimate Edition, the other host of the package for analysis and processing. And filter function<余虎> 在 2025-07-04 上传 | 大小:2kb | 下载:0
[编程文档] serialport
说明:简单而又十分有用的串口通信实例源代码,本人已经调试过,非常实用。-Simple but very useful for serial communication source code examples, I have debugged very practical.<胡国> 在 2025-07-04 上传 | 大小:2kb | 下载:0
[软件工程] 4st-basic-ns2-script
说明:how to create and run a simple 2-node wireless network simulation<ajeet> 在 2025-07-04 上传 | 大小:2kb | 下载:0
[编程文档] main
说明:将两块CAN总线开发板CANH---CANH,CANL---CANL相连连接无误后分别按动中断按键。相应的数码管显示加一,并通过CAN总线发送到另一块数码管上显示。-Two CAN bus development board CANH--- CANH, CANL--- CANL connected connected to the correct respectively pressing the interrupt button. Corresponding digital display p<wangqian> 在 2025-07-04 上传 | 大小:2kb | 下载:0
[编程文档] main
说明:CAN开发板-CAN自收发实验,数码管从右到左分别是1~4位。数码管1、2位显示发送的数据,3、4位显示接收到的数据。每按一次中断按键发送数据值增一。--CAN CAN development board self-transceiver experimental digital tube from right to left are 1 to 4. 1,2 bit digital tube display data sent, 3,4-bit display data received. Ea<wangqian> 在 2025-07-04 上传 | 大小:2kb | 下载:0
[编程文档] main
说明:将两块CAN总线开发板CANH---CANH,CANL---CANL相连,通过串口调试软件发送数据到单片机中,数码管显示相应的数值,并通过CAN发送到另一块CAN开发板上。-Will be connected to two CAN bus development board CANH--- CANH, CANL--- CANL debugging software to send data through the serial port to the microcontroller, digit<wangqian> 在 2025-07-04 上传 | 大小:2kb | 下载:0