搜索资源列表
2410LCD
- the programmer for samsung s 2410, it s for LCD controler
2410FLASH
- it is samsung 2410 programmer.it s for flash
2410bsp
- 三星公司出的2410系列ARM9芯片的bsp-Samsung, the 2410 Series ARM9 chip BSP
vivi-sd-040403.tar
- VI 是2410的ARM9芯片的BOOTLOADER,用于启动和初始化芯片-VIVI 2410 is the ARM9 chip BOOTLOADER for startup and initialization chip
HHARM2410-kernel
- 华恒的2410核心板原理图,用户只要按照图上的话,肯定没有问题-huaheng core of the 2410 board schematics, as long as users of the Plan, will have no problem
jtager-0.3.0.tar
- linux下的jtag仿真器程序,可使用在arm7(44b0,4510,2410等)和arm9上面,可以烧写flash 39lv160等,再不用两个系统不停重启了。-the JTAG Emulator procedures, the use of the ARM7 (44b0, 4510,2410) and arm9 above, 39lv160 burning flash, no longer have to keep two sys
s3c2410fb
- 2410的一个LCD驱动(fr a mebuffer驱动)-2410 LCD actuation (fr a mebuffer actuation)
2410loadGNU
- 2410 nand boot load!(4K DRAM) 0地址开始运行,没有象VIVI拷贝自身到 高端内存运行,可以用它加载UBOOT。 也可以改写它用来引导自己的系统-2410 nand boot load! (4K DRAM) 0 addresses begin, as VIVI not copy itself to high-end memory operation, can be used UBOOT lo
iicdriver
- 在网上搜索到的2410的IIC driver. 还没有用过,供参考。我打算对比一下。-online search of the 2410 driver of the IIC. Has not been used for reference. I intend to weigh.
用于FS2410的Qt嵌入式图形开发实战篇
- t嵌入式图形开发实战篇 嵌入式应用的开发工作基本上是在工作站或是PC 机上完成的,我们在工作的机器上调试运行嵌入式应用,并将输出结果显示在一个仿真小型设备显示终端的模拟器上。在开发的后期,我们要根据我们选择的嵌入式硬件平台,将嵌入式应用编译链接成适合在这个硬件平台上运行的二进制目标代码,另外由于应用使用到了Qt/Embedded 的库,所以我们还要将Qt/Embedded 库的源代码编译链接成为适合在这个硬件平台上使用的二进制
2410iic
- 2410开发板在ADS下测试IIC的程序 运行步骤: 1 打开iic.mcp工程文件 2 运行 3 观察终端输出从eeprom中 读出的数据 文件说明: iic_test.c 开发板初始化文件 2410iic.c iic实验主程序文件-2410 ADS development board under test in the IIC running steps : an open iic.mcp engin
2410iis
- 2410开发板在ADS下测试IIS的程序 运行步骤: 1 打开iis.mcp工程文件 2 运行 3 根据屏幕提示,下载pcm文件到开发板中 然后接上耳机在开发板上的spi输出端,听取 音频输出 文件说明: iis_test.c 开发板初始化文件 2410iis.c iis实验主程序文件-2410 ADS development board under test in the running IIS s
2410LED
- 2410开发板在ADS下测试LED的程序 运行步骤: 1 打开led.mcp工程文件 2 运行 3 观察开发板上的跑马灯闪烁 文件说明: init.s 开发板初始化文件 Main.c 中断实验主程序文件-2410 ADS development board in the LED under test running steps : an open led.mcp engineering documents t
2410include
- 2410开发板在ADS下测试程序的头文件 运行步骤: 1 拷贝到工程目录 2 打开mcp工程文件 2 运行 -in 2410 ADS development board under test procedure documents for the first running steps : a copy of the directory two works projects open mcp running two
2410AD
- 2410开发板在ADS下的A/D转换测试程序。 运行步骤: 1 打开ad.mcp工程文件 2 运行 3 用一根导线连接ad 输入0通道,观察屏幕输出数据的变化 文件说明: ad_test.c:开发板初始化文件 ad.c :ad测试主文件-2410 ADS development board in the A/D converter testing procedures. Running steps : one
2410DA
- 2410开发板在ADS下的D/A转换测试程序。 运行步骤: 1 打开DA.mcp工程文件 2 运行 3 使用示波器, 连接示波器与开发板上的DA输出和地线, 观察示波器上的变化 文件说明: ad_test.c 开发板初始化文件 ad.c ad实验主程序文件 -2410 ADS development board in the D/A converter testing procedures. Ru
2410int
- 2410开发板在ADS下的中断测试程序。 运行步骤: 1 打开int.mcp工程文件 2 运行 3 按下开发板上的Eint0,Eint5,Eint19按键 观察终端上的中断输出 文件说明: int_test.c 开发板初始化文件 Eint.c 中断实验主程序文件-development board in 2410 under the ADS interruption test. Running steps
fs2410_bios
- FS2410板子的bootloader,在ADS中编译出bin文件,烧写到2410 flash 0地址重新上电即可。-Bootloader FS2410 plank of the ADS compile the bin, burning of the flash 0 2,410 addresses can be re-power.
2410addr
- 我开发的2410应用程序的一部分,陆续会有更多的上载,希望大家喜欢-development of the 2410 part of the application process, will continue to be available on the more hope you like
2410init
- 我开发的2410应用程序的一部分,希望大家能够喜欢-development of the 2,410 applications for the part, hope that we can love