搜索资源列表
DEC5416-Boot
- dsp5416 seed boot 代码-dsp5416 seed boot code
u-boot-1.2.0-edb93xx_support
- u-boot 1.2.0 for ep93
u-boot
- 这是关于U-boot的一份教程,内容不错,希望对大家有帮助。-This is the U-boot on a tutorial, as well, hope to help everyone.
U-Boot
- 嵌入式系统中U-Boot基本特点及其移植方法-Embedded systems the basic characteristics of U-Boot and transplant method
u-boot
- U-BOOT,如何剪裁移植,很有参考价值-U-BOOT, how tailoring transplantation, a good reference
boot
- arm7,44b0芯片的引导程序,很不错的。 -arm7, 44b0 boot chip, it is good.
u-boot-1.1.3-mike2410.tar
- s3c2410开发板的U-boot移植,linux下编译-S3C2410 development board of the U-boot transplantation, linux compiled under
u-boot-1.1.5_atmel_1.4
- 这是uboot1.1.5的一个补丁,打上这个补丁可以使uboot支持at91sam9260的开发板。 在EBD9260-p开发板上移植u-boot1.1.5可以从ATMEL的一块demo板(at91sam9260ek)的uboot文件里修改而得。其实1.1.5的uboot并不支持ATMEL的at91sam9260ek,只支持at91rm9200ek,通过ATMEL官方提供的u-boot-1.1.5_atmel_1.4.diff.bz
u-boot-1.1.4-imx21-jk1
- 基于freescale imx21 uboot启动的补丁程序,官方使用的是自己的启动程序,如果需要使用u-boot进行启动部分调试的朋友,可以试试!-Based on freescale imx21 uboot startup patch, official use of their own start-up procedure, if need to use u-boot to restart part of debugging Fr
u-boot-1.3.3.tar.bz2
- u-boot-1.3.3 arm bootloader
u-boot-1.2.0-2007-05-01-1177951018.tar
- 44B0 开发板启动的 u-boot-1.2.0-0.tar.gz-44B0 development board to start u-boot-1.2.0-0.tar.gz
U-BOOT-1.3.2_porting_to_44B0X
- U-BOOT-1.3.2移植到44B0X详细过程。内包含补丁和移植过程,可直接应用到系统上面。如果有问题可以直接与我联系。QQ:250008260-U-BOOT-1.3.2 ported to the detailed process 44B0X. Contains patches and transplantation process, can be directly applied to the system above. If y
u-boot
- 广嵌的S3C2410开发板给的U-BOOT很是经典,是学习bootloader的好资料,识货的赶快下!-Canton inlay of S3C2410 development board to the U-BOOT was a classic, is a good learning bootloader information, know all about the goods under the hurry!
u-boot-1.3.4
- U-BOOT,著名的Bootloader程序,可用于arm,mips等微处理器。-U-BOOT, famous Bootloader program can be used for arm, mips, such as microprocessors.
DEC5416-Boot
- SEED_DEC5416的boot程序源码-SEED_DEC5416 source of the boot process
u-boot-2008.10
- 最新版的u-boot,2008-10-18发布-The latest version of u-boot ,2008-10-18 release
u-boot-1.1.6_OpenJTAG
- 支持S3C24x0/yaffs/USB/CS8900/DM9000/OpenJTAG/Nor,Nand启动的u-boot 添加的功能: 1. 同时支持S3C2410和S3C2440 2. 支持串口xmodem协议 3. 支持USB下载,可以在PC上使用dnw传数据 4. 支持网卡芯片CS8900 5. 支持NAND Flash读写 6. 支持从Nor/Nand Flash启动 7. 支持烧写yaffs文件
boot
- boot.asm是用nasm汇编程序做的VESA显存模式驱动的写点 带有软盘驱动引导程序 用FloppyWriter.exe写主引导区-boot.asm is done NASM assembler VESA mode driver memory write point boot with the floppy disk drive used to write the Master Boot FloppyWriter.exe D
u-boot-1.3.0
- uboot1.3.0 for s3c2440, 支持nand flash启动-uboot1.3.0 for s3c2440, support nand flash boot
s3c-u-boot-1.1.6_rel-4-3-2_20080917
- s3c-u-boot-1.1.6_rel-4-3-2_20080917.tar.bz2 S3C6410X的U-BOOT源代码 20080917-s3c-u-boot-1.1.6_rel-4-3-2_20080917.tar.bz2S3C6410X the U-BOOT source code 20080917