搜索资源列表
33
- 关于声波传播过程中各个网线的布置规律及技巧的c语言程序-About the wave propagation process in all of the network cable layout rules and techniques of the c language program
OWTS-tan
- 基于OWTS系统的电力电缆介质损耗正切角检测,能够方便快速的对电力电缆进行检测。-Based OWTS system power cable dielectric loss tangent detection, able to facilitate the rapid detection of the power cable.
66
- 对结构响应信号进行连续复Morlet小波变换,根据小波系数的模极大值提取小波脊线,识别结构的瞬时频率;为降低噪音的影响,采用奇异值分解(SVD)方法进行降噪处理,建立了一种基于连续复小波变换识别时变系统 瞬时频率的方法。用一个具有时变刚度的弹簧质量系统的数值算例验证方法的有效性,随后设计了一个时变拉索 结构试验,分别对索施加线性和正弦变化的拉力,同时测试结构的冲击响应,运用提出的方法成功地识别了索的瞬时频率。数值与试验结果表明,
s5pc100_camera_V1
- 基于S5pc100的USB摄像头驱动程序代码,功能;通过USB线连接到控制中心,控制中心采集到到摄像头上的数据显示到LED屏幕上,可进行分屏显示-Based on S5pc100 USB camera driver code, function Through the USB cable to connect to the control center, control center collected to the camera a
TestSystem
- 可以实现用labview软件对恒河的功率分析仪进行联机读取数据,使用网线连接,方便,实用。-Can be achieved using labview software Ganges power analyzer for online reading data, using a network cable connection, convenient and practical.
AutoTestSystem
- 实现对恒河功率分析仪的联机数据读取,可以用网线或者RS232均可,带自动记录功能。-Achieve the Ganges Power Analyzer online data read, you can use the network cable or RS232 can be, with automatic recording feature.
XSJJ
- 矩阵键盘数码管显示键值 * * 排线连接方法:JP8(P1) 与JP4(矩阵键盘接口)连接 P0与JP3(静态数码管)连接 * * 矩阵键盘定义: * * P1.1-P1.4为列线,P1.4-P1.7为行线 * * 喇叭接P1.5口 矩阵键盘P1口,-Matrix keyboard LED display keys** cable connection method: JP8 (P1) and JP4 (matri
cortex_m0-CAN-keil
- 了解 CAN 总线通信原理,实现利用 CAN 总线完成通信 在进行实验的时候,需要将两块开发板连接 USB 线进行充电,因为利用 CAN 总线进 行通信需要有较高的驱动能力。-Learn CAN bus communication theory, to achieve complete CAN bus communication when carrying out the experiment, you will need
mini80E
- 使用前请先看自己主板上的单片机型号 1、STC89C系列单片机硬件连接,usb线连开发板和电脑用于供电,usb转串口线连接到开发板和电脑(usb端接电脑。DB9针端接单片机开发板)。需要安装HL340或者HL341驱动,使用STC ISP软件下载程序 2、AT89s52单片机硬件连接,usb线电脑连接电脑和usbasp下载器,10芯扁线连接usbasp下载器和开发板。这根usb起到同时供电和下载程序的作用。如果需要做串口通
[JDP]_API
- 混合器,现在检测音频卡设备和显示所有可用设备卷。控制主、CD、线、辅助、选项卡,麦克风,低音和高音。这是所有的API,可以有点困惑新手� 年代。打开系统声音合成器和使用此应用程序将移动搅拌机� 年代卷以及这个应用程序。-Mixer, audio card is now testing devices and displays all available devices volumes. Control of th
_P2P_Pro
- 它允许两个用户聊天和发送文件(任何尺寸)。这是一个独立的应用程序,这意味着没有两个程序(客户机和服务器)。客户机和服务器都是建立在相同的应用程序。截图展示了主要的聊天窗口,和“接收文件”窗口。它说,文件传输正3 MB /秒,那是因为我发送它在本地(自己)。在电缆连接,文件通常发送大约50 - 60 KB / s。-Which allows two users chat and send files (any size). This is
code_2.2
- CICC超导电缆模拟部分程序,用于模拟超导失超和回复-CICC superconducting cable analog portion of the program used to simulate the superconducting quench and reply
KuGouMusicPlayer
- 模仿国内酷狗音乐盒做的一个应用,和数据库相连,可以对歌曲进行索搜,音乐分类,都做了处理-Cool dog music box imitate domestic made an application, and connected to the database, you can search for songs cable, music classification, have done a deal with
INT-PS2-1602
- PIC16F877A RB0引发外部中断的使用方法,学习PS/2接口键盘解码的方法 按下PS/2键盘按键后,将引发外部中断,进入中断后,对键盘数据线进行判断,以判断出是哪个按键 按下,并利用1602液晶,将该键显示出来。-PIC16F877A RB0 interrupt caused by the use of external methods, learning PS/2 keyboard interface method o
dsw
- P0与J12 用8PIN排线连接, P1与JP16 用排线连接,573锁存器控制和单片机脚直接位选控制(非译码器控制)数码管。-P0 and J12 cable to connect with 8PIN, P1 and JP16 with a ribbon cable, 573 feet latch control and chip select control bits directly (non-decoder control) d
DSW
- P10 (P0)与J12 JP9(P3)与JP5 用8PIN排线连接,P3.2和P3.3外部中断输入 由两个四位数码管分别显示计数-P10 (P0) and J12 JP9 (P3) and JP5 cable to connect with 8PIN, P3.2 and P3.3 external interrupt input consists of two four digital tube display counts
dsw
- JP10与J12,JP8和JP1用8PIN排线连接,20秒倒计时换通道时 黄灯闪烁3秒,本实验只开通了一个通道有兴趣的学员可以自己加通道。-JP10 and J12, JP8 and JP1 cable to connect with 8PIN, 20 seconds countdown yellow light flashes when changing channels for 3 seconds, the experiment o
share_WLAN
- 电脑插一个无线网卡后用netsh命令把有线网共享成无线,免去买路由器和不稳定的问题,方便好用-After the computer plug a wireless card with the netsh command to share a wireless cable network, eliminating the need to buy a router and instability problems, easy to use
BS373-RF
- 用有线电视频道发生器BS373做的47-1000M高频信号发生器-BS373 generator with cable channels do 47-1000M frequency signal generator
Print
- 在BCB中,利用USB线,来实现斑马打印机打印打印标签的功能-The BCB, the use of the USB cable to achieve zebra print label printer features