搜索资源列表
CYJLAST8
- C8051F020开发应用程序,完成人机界面及IO的输入输出,包含8路AD模拟输入和2路DA输出,还有PWM驱动电机的控制。-C8051F020 development and application procedures, man-machine interface and complete IO input and output, AD contains eight analog input and two output DA Ro
CYJLAST8
- C8051F020开发应用程序,完成人机界面及IO的输入输出,包含8路AD模拟输入和2路DA输出,还有PWM驱动电机的控制。-C8051F020 development and application procedures, man-machine interface and complete IO input and output, AD contains eight analog input and two output DA Ro
DAconversion
- 这是一个由51单片机控制的数模转换器(DAC0832),可已输出正弦波,方波,阶梯波,三角波等模拟信号-This is a 51 MCU control of the Digital to Analog (DAC0832). sine wave output can be had, square, ladder wave, triangular wave signal simulation
DAC
- TMS320F2812 DAC程序 用于实现数字到模拟的输出-TMS320F2812 DAC procedures used to achieve digital-to-analog output
AD08321602
- 数字电压表 AD芯片: 采用8位串行A/D转换器ADC0832。 ● 8位分辨率,逐次逼近型,基准电压为 5V ● 5V单电源供电 ● 输入模拟信号电压范围为 0~5V ● 有两个可供选择的模拟输入通道 显示: 使用三个数码管。 显示范围: 0.00 - 5.10 (单位:V) 连接方式: AD_CLK → P1.0 AD_DAT → P1.1
sheji
- 设计 1 :AD/DA 模拟量输入输出数据采集卡设计( 1 人选) 设计内容:设计一块 具有AD/DA 模拟量输入输出卡,该卡具有对模拟电压或电流进行采集的能力和具有对模拟电压或电流输出能力,该卡通过微机系统的输入/输出扩展接口(PCI或ISA接口)与微机系统连接。 -Design 1: AD/DA analog input and output data acquisition card design (1 person) d
DA
- 在LPC2200上运行的程序 可以把内部的数字信号转为模拟信号输出-In the LPC2200 to run the procedure can be an internal digital signal to analog signal output
showdata
- 这是我做的数据采集实验,通过AD采集数据,DA口输出模拟电压值-This is what I do experimental data acquisition, through the AD data acquisition, DA analog output voltage value
11
- 具有8位开关量输入,8位开关量输出(或带有四位数码显示输出),并具有8路AD输入(ADC0809),1路DA输出(DCA0832)的单片机控制系统。系统要求对8位开关量输入信号能够进行监控,8位开关量输出对应8位开关量输入(或用数码显示出来)。对于模拟量输入、输出通道(A/D,D/A),要求编制比例K放大器输出-Switch with 8 input, 8 output switches (or with four digital di
DA
- DA芯片采用TL5615。程序功能:实现固定模拟量电压输出。可输出2*Vref。-DA chip is TL5615. Program features: achieving a fixed analog voltage outputs. Can output 2* Vref.
cPCI-8500
- PCI总线多功能卡的设计,设计内容包括,4路DA输出,6路模拟输入(0-10V),-PCI bus multi-function card design, design elements include, 4-way DA output, 6-channel analog input (0-10V),
TLV5618
- TMS320C31 DSP 驱动TLV5618 DA 芯片的例程,基于汇编编写的,首先将AD采集的数据用DA来模拟输出。-TMS320C31 DSP TLV5618 DA
MP411-LabVIEW
- MP411是一款USB2.0/1.1总线兼容12位采集模块,具有16路模拟输入,工作在软件启动模式、二路12位DA输出(MP411)、开关量16路输入/16路输出、一路20位计数器(MP411),支持频率测量。采用USB总线,支持即插即用。MP411的所有功能设置都可以通过LabvIEW软件控制,内含界面。-MP411 is a USB2.0/1.1 bus-compatible 12-bit acquisition module wi
main
- msp430的相关程序,用于DA输出模拟电压。用于许多系统中-MSP430
pcf8591
- 单片机控制的PCF8591 DA输出模拟-Microprocessor controlled PCF8591 DA analog output
PCF8591-DA-analog-output
- PCF8591 DA输出模拟,新手了解PCF8591和单片机DA-PCF8591 DA analog output, and the novice understand the PCF8591 chip DA
110-PCF8591
- pcf8591芯片程序,DA输出模拟量,完整keil工程,直接可用-pcf8591 chip program, DA analog output, complete keil project directly available
110-PCF8591-DA-output
- 110-PCF8591 DA输出模拟,用单片机模拟D/A的实现,适用于51单片机-110-PCF8591 DA analog output with single-chip analog D/A is achieved for 51 single
9.DAC
- DA输出模拟信号 AD采样 并在LCD液晶屏上显示。(DA output analog signals, AD sampling, and displayed on the LCD LCD screen.)
110-PCF8591 DA输出模拟
- 110-PCF8591 DA输出模拟(110-PCF8591 DA output simulation)