搜索资源列表
uIP_webserver
- EASYARM2200开发板上，一个微型嵌入式web服务器-源代码。基于uIP6.0协议栈。（ADS).内有具体说明。-EASYARM2200 development board, a micro-embedded web server-source code. Based on uIP6.0 protocol stack. (ADS). Within specified.
uCOS-IIyyjl
- 在EASYARM2200上的uCOS-II应用举例-in the EASYARM2200 for uCOS-II Application Examples
ucos_view_ucos283
- RTOS版本：uCOSII V2.83 OSView版本：uCOS_View 1.10 开发环境：KEIL 编译器：ADS1.2 开发板：EasyARM2200 内部FLASH运行，Bank0=ExFlash Bank1=ExRAM 调试口：Uart0 57600bps 目前在OS_CPU_A.s里的OS_CPU_SR_Save OS_CPU_SR_Restore函数没起作用，功能是开关中断，用仿真器看时会发现根
Zlg_IPforlpc2200
- 在UCOS-II系统下一种简单易懂的TCP/IP协议,我在EASYARM2200上调试完全通过了,如果有问题也可以通过电邮联系我.-in UCOS-II system in a simple and easy to understand TCP/IP protocol. I EASYARM2200 debugging completely passed, if there are problems can also contact me
ARM_FlashDown
- 适合开发板EasyARM2200、SmartARM2200、MagicARM2200和MagicARM2200-S，可将程序下载到flash-Suitable development board EasyARM2200, SmartARM2200, MagicARM2200 and MagicARM2200-S, the procedure can be downloaded to flash
LEDDISP
- 通过观察EASYARM2200教学实验平台上的LED1-LED8的显示判断74HC595数据移位是否正确-EASYARM2200 teaching experiment by observing platform LED1-LED8 display data 74HC595 shift to determine whether the correct
ReMap
- EASYARM2200教学实验平台上的存储器映射-EASYARM2200 teaching experiment platform memory-mapped
I2cInt_c
- EasyARM2200 I2C接口实验代码.通过I2C接口控制ZLG7290.按相应的按键数码管的显示位会有相应的闪烁.-EasyARM2200 I2C interface experimental code. Through the I2C interface to control ZLG7290. According to the corresponding button LED display spaces will be the
EasyARM2200map
- easyarm2200开发板的完整图纸，带有详细的参数标注。-easyarm2200 a complete development board drawings, with detailed tagging parameters.
lcm_display
- EASYARM2200上图形液晶显示代码-EASYARM2200 on the graphic LCD code
uCOS-II_beep
- easyarm2200蜂鸣器的控制源代码-easyarm2200 buzzer control source code
lwip_ucos
- 该工程源码是基于EasyARM2200开发平台开发的嵌入式TCP/IP协议栈，协议栈以LwIP为基础，基于uc/os-ii为操作系统，以太网驱动芯片为RTL8019AS,实现了支持多线程实时应用的嵌入式TCP/IP协议栈-The project is based on the source EasyARM2200 embedded development platform for the development of TCP/IP pr
uClinux_EASYARM2200
- EasyARM2200 开发板仅有512KB RAM 和2MB FLASH 存储器资源，本文通过分析uClinux 的内存管理和内核引导机制，介绍uClinux2.4 针对EasyARM2200 开发板的 移植和改造方法。-EasyARM2200 development board with only 512KB RAM and 2MB FLASH memory resources, this article by analyzin
ARM_Flash_boot
- 功能：将flash.bin文件写入到NOR Flash中，起始地址为0x000000，实现程序的固化。 适合开发板：EasyARM2200、SmartARM2200、MagicARM2200和MagicARM2200-S。-Function: flash.bin document will be written to NOR Flash, the starting address of 0x000000, realize the c
LPC2220_LCM
- lpc2220处理器实现128*64点阵液晶程序，基于easyarm2200平台的ADS代码。-realize lpc2220 processor 128* 64 dot matrix LCD procedures, based on the ADS platform easyarm2200 code.
EasyARM2200Ucos
- 这个软件主要争对EasyARM2200开发板的ucOS的移植,这个框架成功用在一些产品-The main struggle of the software development board EasyARM2200 uCOS of the transplant, the success of this fr a mework used in some products
WR_NORFlash
- 这是一个关于用JTAG口烧写flash的程序,实现程序的固化,适合开发板：EasyARM2200、SmartARM2200、MagicARM2200MagicARM2200-S。-This is a JTAG port on the use of flash programmer procedures realize the curing process is suitable for development board: EasyAR
uclinux_EasyArm2200
- EasyARM2200开发板仅有512KB RAM和2MB FLASH存储器资源，能否运 行uClinux以及如何运行 uClinux，是喜爱这款开发板的技术人员一个共同的心 声。本文通过分析uClinux的内存管理和内核引导机制，介绍了uClinux2.4针 对EasyARM2200开发板的移植和改造方法。 -EasyARM2200 development board with only 512KB RAM and
SendStr_c
- 基于EasyARM2200的串口发送实验。 目标板不断通过串口0向PC机发送hello world, 使用外部11.0592MHz晶振.-Based on the serial send EasyARM2200 experiment. Target board continuously to the PC through the serial port 0 send hello world, the use of an exte
easyARM2200
- ARM7TDMI 多媒体课件。为只读格式，较详细。偏向实践。-ARM7TDMI multimedia courseware. For read-only format, more detailed. Bias in practice.