搜索资源列表
PWM_Output
- PWM控制源程序，直接就可以编辑应用的，可以用来演示-PWM control source, it can directly edit application, which will be used to demonstrate
PWM_Output
- PWM控制源程序，直接就可以编辑应用的，可以用来演示-PWM control source, it can directly edit application, which will be used to demonstrate
PWM_Output_Input
- 用TIM3定时器在PA6、PA7、PB0、PB1输出四种频率相同占空比分别是50 、37.5 、25 、12.5 的信号。 用TIM2的PWM_Input功能，从PA1口捕获PWM信号的频率及占空比，并用USART1输出测量信息。-At TIM3 timer with PA6, PA7, PB0, PB1 output frequency of the same four are 50 duty cycle, respective
EASYARM2103
- main.c---ADC程序 TIMER0 MAT_INT 定时器0匹配产生中断 TIMER1 MAT_OUTPUT 定时器1匹配输出翻转 TIMER1 PWM_OUTPUT 定时器1PWM输出 TIMER2 CAP_INT 定时器2捕获产生中断 UART0 Test:串口通信实验—查询方式 UART0 Interrupt Test：串口通信实验—中断方式-The Programme of EasyARM2103
PWM_Output
- 利用STM32的TIM定时器产生四个不同占空比的方波信号 。-his example shows how to configure the TIM1 peripheral to generate 7 PWM signals with 4 different duty cycles.
PWM_Output
- 本程序用于stm32f103系列的arm开发板用程序pwm输出-pwm out
PCA-PWM_Output.c
- C8051F020下用PCA可编程计数器，来实现pwm波形输出，占空比可调-C8051F020 under PCA Programmable Counter, to achieve the the pwm waveform output, adjustable duty cycle
PWM_Output
- 利用STM32的定时器TIM1产生PWM波-PWM wave generated by STM32 timer TIM1
PWM_Output
- 利用stm32主控MUC的高级定时器实现PWM两路输出控制伺服电机巡航-MUC using stm32 senior master timer, PWM outputs to control two servo motors cruise
PWM_Output
- STM32F103X PWM 程序 * @file b pwm_output.c * @author STMicroelectronics * @version V1.0 * @date 2013-xx-xx * @brief tim3输出四路pwm bsp -STM32F103X PWM program * @file b pwm_output.c * @author STMicro
PWM_Output
- pwm的程序，可直接使用，只要修改一点点内容就可完全使用-pwm program, can be used directly, just modify a little bit of content can be fully use
PWM_Output
- 基于STM32单片机自带的定时器PWM输出功能程序-STM32 microcontroller based timer PWM output function that comes with the program
PWM_Output
- 这是一个基于stm32的四路PWM输出代码，原本用于四旋翼。-This is based on stm32 of four PWM output code, originally for four-rotor.
PWM_Output
- 两路stm32PWM输出，IO可随意配置成套文件，拿来以后改一下配置就可随意使用-Two stm32pwm output, IO can be configured with complete sets of documents, used to change the configuration can be free to use the two stm32pwm outputs, IO can be configured with
PWM_output
- 使用STM32F4的TIM3来产生PWM 输出，使用 TIM14的通道1来产生PWM来控制DS0的亮度。-Use the STM32F4 s TIM3 to generate the PWM output and use PWM1 channel 1 to generate a PWM to control the brightness of the DS0.
PWM_Output
- 基于STM32 的上输出PWM波的代码，非常管用-based on STM32
PWM_Output
- 实现PWM的输出，已验证好使，可以正常使用(To achieve the output of PWM, has been verified so that)
PWM_Output
- stm32l151单片机PWM控制程序，四路PWM控制(PWM control program of stm32l151 single chip microcomputer)