搜索资源列表
sja1000-driver
- arm扩展can总线的驱动程序-arm can extend Bus Driver
can-0.7.1.tar
- PCM9880是一块PC/104界面的双端口隔离CAN总线通讯卡，它提供PC与控制器局域网之间的连接。采用高性能的SJA1000控制器和82C250收发器，每个端口工作的波特率可达1Mbps。内置CAN控制器具有总线仲裁和带错误侦测自动重复传输功能，有效的避免了数据丢失，确保了系统的稳定。端口采用直接存储地址映射，加快CAN控制器访问速度。两个板载控制器对应不同的内存地址，应此两路控制器可以同时独立工作。卡上还有光电隔离器，能保护PC和
1111bcan_test
- 这是CAN总线收发器SJA1000的控制程序,采用C语言编写的,有一定参考价值,-CAN transceiver SJA1000 control procedures, using the C language, a certain reference value,
CAN总线
- CAN总线与51单片机的接口原理图，使用的是sja1000和tja1040(philips).还包括了具体的文档资料和c语言控制代码(附加了LCD代码和LCD接口以及电源变换原理图).搞CAN总线一步到位.-CAN Bus and 51 microcontroller interface schematics, using the sja1000 and tja1040 (Philips). Also include the speci
sja1000
- can 控 制 器 初 石 化 程序-early petrochemical procedures
CAN源代码
- 用标准c语言编写的can总线源程序.包含sja1000,82527等芯片的源程序.-standard language prepared by the bus can source. Included sja1000, 82527 chip of the source.
can-robot
- can总线的应用，以及针对SJA1000芯片的C语言编程，源代码使用在robot控制的一部分-can bus applications, and SJA1000 chip against the C programming language, the source code used in part of the robot control
cancard
- 电梯门禁系统：包括系统原理图，通信流程图和C语言源程序 AT89C52控制H6152读卡器读写Mifare射频卡并通过CAN总线连接系统主机，CAN总线控制器为SJA1000，收发器为P82C250.-Door guard system of the lift, Including systematic principle picture and source program . AT89C52 control H6152 card r
SJA_BCANCONF
- 还是基于总线控制器SJA1000的CAN2.0A通信程序,这是初始化的第一部分.-based on the Bus Controller SJA1000 CAN2.0A Communication Program, which is the first part of initialization.
SJA1000_avr
- 单片机对SJA1000的驱动，包括初始化，收发数据，中断- MCU drive for SJA1000(include initial,transmit and receive data,interruption and so on)
CAN模块程序清单
- 基于sja1000的CAN驱动程序 可以直接使用在现场总线中-sja1000 based on the CAN driver can be used directly in Fieldbus
CAN485
- CAN总线控制器sja1000及CAN收发器82C250的应用，本程序用A51编程，适合初次开发CAN总线的用户-CAN Bus Controller sja1000 CAN transceivers and transceiver applications, the procedures used A51 programming, for the initial development of the CAN bus users
SJA1000_initial
- sja1000的初始化程序，用C编写的，很有使用价值-sja1000 initialization procedures, the preparation of the C and very useful
InitSJA1000
- sja1000在basicCan模式下的初始化程序-sja1000 basicCan mode in the initialization procedures
CAN_Zongxiantongxun_AVR
- MCU：ATMEGA8515 Frequence: 16M 描述：利用已有CAN TEST V1.0电路板进行调试, 可靠性测试已通过，并发现8515外部中断不稳定 的原因是没有在INT0脚加上拉电阻，加上后已能 够稳定地运行 调试过程中发现SJA1000的首地址设置有误，改过 后，当CAN发送数据时，程序能进入中断了，但发现 中断是由出错报警中断引起的，估计与波特率设置 有关。 通过修改CDR的
try_sja1000
- 用51单片机控制SJA1000通信的一个小程序，其中包括对SJA1000的初始化，发送状态控制，接受程序等。-SJA1000 microcontroller control of a small communications procedures, the SJA1000 including the initialization, this state control, acceptance procedures.
can_basic
- 用于Can Basic模式下底程开发 适用于51单片机和SJA1000组成的 收发单元 SJA_BCANCONF 为寄存器定义 SJA_BCANFUNC为可调用的只程序 -for late-model applied to the development of SCM and 51 of SJA1000 transceiver modules SJA_BCANCONF definition SJA_BCANFUNC to
SJA1000BASIC
- SJA1000的学习资料,不知道我什么时候下载的很不错的,可以-learning materials, I do not know what the download time is good, can s
CanPrograme
- 现场总线can基于sja1000通信控制芯片的初始化程序及通信程序和相应的中断处理-fieldbus communication sja1000 can control based on the chip initialization procedures and communication procedures and the corresponding the interrupt handling
sja1000forc51
- sja1000与51单片机的功能实现源代码-sja1000 MCU with 51 of the realization of the function source code