搜索资源列表
STM32F10x的USART1 程序
- STM32F10x的USART1的测试程序，采用中断收发，希望对大家有益
USART7.5
- stm32 USART1口配置与使用，包括收发等基本要求。-stm32 USART1 I configure and use, including the transceiver and other basic requirements.
usart1
- AMR_stm32f103的串口程序，利用中断方式进行接收。希望对大家有用。-AMR_stm32f103 serial programs, using the interrupt mode to receive. Want to be useful to everyone.
10.UART--LCD
- cc2430有两个穿行通信接口USART0和USART1，此源代码可以实现ZigBee节点与ＰＣ串口的通信，用于测试串口功能-cc2430 There are two walk through communication interface USART0 and USART1, the source code can be achieved ZigBee nodes and PC serial port communication, s
STM32-USART-DEMO-V2
- 演示 USART1 当接收缓冲器满时，将接收到的数据传送出去 V6-LED1闪烁表示正在收发数据。 -When the receiver buffer demonstration USART1 full, will receive the data transmitted V6-LED1 flashes that are sending and receiving data.
USART1
- stm32的串口程序，开发软件是keil4-Stm32 of serial program, develop software is keil4
USART
- 在万利199元开发板上实现了uCOS-II移植到STM32的操作，建立了LED闪烁任务以及USART1向计算机发送数据的任务。-Manley 199 yuan in the development board implements the STM32 uCOS-II ported to the operation, the establishment of the task and the LED flashes USART1 send
USART1-
- USART1串口通信程序，使用查询方式，使用通用232串行线（3线制，使用DB9接口的2、3和5好端脚）将系统板的232口（J2)与PC机的232口相连。-USART1 serial communication program, use the query method, using a common 232 serial cable (3-wire, DB9 interface with a good side and 5 feet
STM32_USART1
- stm32 库文件：3.10 本程序是使用UART1接收中断,收到数据后直接把原数据从USART1发回去 一开机时,会发送 "Starting....."到USART1-stm32 Library: 3.10 This procedure is to use UART1 receive interrupt, received data directly to the original data sent b
7MSP430F149-use-USART1-to-define-P4
- 使用MSP430F149芯片，透过串口与电脑通信，波特率9600,8数据，无校验。使用32.768k晶振，使用P3.6和P3.7口作为发送和接收口，使用异步通信USART1，采用查询形式。实现通信，当单片机接收到以S结尾以W开始的字符串时，单片机会把中间的数据赋值给P4口。-MSP430F149 chip through the serial port to communicate with the computer, baud rat
USART1
- 基于金牛开发板的C代码 usart1的测试代码，keil工程-Based the Taurus development board C code usart1 of the test code, keil project
USART1-polling
- USART1采用查询方式+ucos-iii实现-USART1 using queries+ucos-iii realization
STM32-screen-P-USART1
- stm32+ucos+ucgui编写的USART1通信例程-STM32+ UCOS_UCGUI serial communication routines written USART1
stm32-modbus-USART1-TIM2
- 用stm32的usart1和tim2模块实现了modbus从站协议。IAR编译环境。-usart1 and tim2 module implements modbus slave protocol. IAR compiler environment.
USART1
- SMT32 usart1(非阻塞) 中断接收，DMA发送
STM32F207VC-RS485-USART1
- STM32F207VC RS485使用USART1-STM32F207VC RS485 use USART1
usart1
- AVR USART1 example of use
usart1
- avr atmega128 usart1 sample
USART1—USART1接发
- 串口1收发，测试成功，stm32f407zgt6(stm32f407zgt6 usart1)
stm32单片机通过USART1 收发数据
- stm32单片机通过USART1 收发数据通过串口调试软件，向板子发送数据，板子接收到数据后，立即回传给电脑。 库版本 ST3.0.0(STM32 MCU through the USART1 data through the serial debugging software to send data to the board, the board receives the data, immediately b