搜索资源列表
AVR_M16_ucos_II
- 1. OS版本为2.76 2. 使用Timer0的比较匹配中断为系统定时,频率为100Hz 3. 三种临界代码保护方式均可以使用,在OS_CPU.h里直接设置即可 如果安装了WinAVR20050214,则直接运行start.bat,输入make all即可开始编译。 如果需要在AVRStudio仿真,运行make extcoff后即可生成调试所需的cof文件。-1. OS Version 2.76 2. Time
chengxu
- M16驱动LCM128645,液晶芯片ST7920-M16 driver LCM128645, LCD chip ST7920
enc28j60
- enc28j60的驱动程序 Microchip ENC28J60 Ethernet Interface Driver Chip type : ATMEGA88 with ENC28J60-enc28j60 driver Microchip ENC28J60 Ethernet Interface Driver Chip type: ATMEGA88 with ENC28J60
test1
- ptr2000的短距离无线通信程序,所用单片机为m16-ptr2000 short-distance wireless communication procedures used in single-chip for the m16
1602_duoji
- 用avr的m16产生pwm波控制舵机的程序!-Avr generated using the m16 wave pwm control procedures for steering gear!
AVR_jtag_stk500
- 这是用M16做的jtag与stk500(正确说应该是ISP)合二为一的,用PC6脚是否是低电平判断是jtag还是stk500。-This is the M16 to do with the JTAG with stk500 (correctly said that it should be ISP) combined with a pin PC6 is to determine whether low-level JTAG or stk
usart
- //ICC-AVR application builder : 2006-7-20 19:18:43 // Target : M16 // Crystal: 7.3728Mhz
stepmotor
- 用M16驱动步进电机 ,实现三种驱动方式: 单四拍驱动、双四拍驱动、单双八拍驱动-M16 driven by stepping motor, drive the realization of three: a single four-beat-driven, two-four beat-driven, beat-driven single-and double-8
usart_icc
- M16控制,从键盘输入字符,当输入字符达到10个的时候,终端和LCD都显示所接收到的字符-M16 control, from the keyboard input characters, when the importation of characters to reach 10 when all LCD display terminals and receive the characters
stepmotor
- 用M16驱动步进电机 实现三种驱动方式 单四拍驱动、双四拍驱动 单双八拍驱动-M16 driven by stepper motor-driven three ways to achieve a single four-shot drive, dual four-shot beat-driven single-and double-eight drivers
conter_icc
- 用M16控制,定时器工作于计数方式,计数值同步显示在LCD上-Using M16 control, timer works in counting methods, including numerical simultaneously displayed on the LCD on
bjdj
- 我写的 四线 步进电机控制 用M16主控-I wrote the four-wire stepper motor control using M16 control
DIYavrSerialSimulater
- 自制AVR串口仿真器资料,用M16试制成功,仿真软件AVRSTUDIO,串口线要按图短接,速度较慢但能用成本低-Home AVR emulator serial data, with the success of M16 trial, simulation software AVRSTUDIO, serial line shorted according to plan, but can be slow and low cost
M16_STK500_Boot
- 程序下载在M16中后,以后不需要任何编程器,只需连接串口就可以使用STK500专业编程器的功能 -Download of the M16, after does not require any programming, simply connect serial port on the STK500 can use the functions of professional programmer
595
- 595的基于avr m16的c程序 调试通过 有兴趣可以-595 based on the avr m16 through the c program debugging are interested can
tea5767_3wire
- Tea5767的3线控制程序,M8单片机,采用3线控制,内有电路原理图,可手动指定频率,也可以上下搜索-TEA5767 the 3-wire control procedures, M8 MCU, using 3-wire control with a circuit schematic can be manually specified frequency, can also be upper and lower search
12864
- LCM128*64指针式万年 硬件:LCM128*64 M16 DS1302 软件:WinAVR 2.0.6.1 时钟:内部4M-Pointer LCM128* 64 years of hardware: LCM128* 64 M16 DS1302 Software: WinAVR 2.0.6.1 Clock: Internal 4M
TEA5767
- 5767例子程序,用C编程,很经典,大家直接复制来用-5767 examples of the procedure, using C programming, it is a classic, we directly copy to use
TEA5767
- TEA5767收音机模块资料 包括(TEA5767驱动程序,3310液晶驱动程序等) -TEA5767 radio modules include (TEA5767 driver, 3310 LCD driver, etc.)