搜索资源列表
S3C44B0x ucos
- ucos移植范例 简单串口驱动可用于移植时的调试,系统源码免费-CENTER transplant simple example can be used to drive Serial transplantation debugger, system source code free
Lesson09_LCD
- s3c44b0X,LCD测试程序,分别进行黑白、4级灰度、16级灰度和256色伪彩屏测试-s3c44b0X, LCD testing procedures were black and white, gray 4, 16 and 256 gray pseudo-color screen test
watchdog实验
- 文件功能 44binit.s----中断初始化,存储器,堆栈,系统初始化,建立C程序运行环境。 mencfg.s-----定义存储器延时等参数 option.s-----定义系统时钟频率等 main.c-------主函数 44blib.c-----S3C44B0X的一些自己编写的库文件-document functional 44binit.s---- interrupted initialization, mem
test_44b_lcd
- arm的LCD例程,型号为S3C44B0X,LCD控制器为S3C44B0X内部。-arm LCD routines, model S3C44B0X, LCD controller for internal S3C44B0X.
armsysucosex2
- 本文是根据我学习ARM开发以来的一些经验总结,以自己设计的S3C44B0X板为例,给出入门上手的最基础知识。有些东西只是个人的主观认为,不一定准确,算作抛砖引玉吧,欢迎大家指正!-this paper is based on my study of the ARM since some experience to design its own board of S3C44B0X example, the entry is easily
lcdkeytest
- S3C44B0X LCD 测试代码!在ARM7TDMI开发板上测试通过,可以切换画面,同时也可以对其它外设进行测试!-S3C44B0X LCD test code! ARM7TDMI development board in the test, can switch images, but also to other peripherals for testing!
ARM S3C44B0X的uClinux引导程序源码
- ARM s3c44b0x的bootloader-ARM s3c44b0x the Bootloader
在s3c44b0x运行的俄罗斯方块游戏 DOS参考代码
- 在s3c44b0x运行的俄罗斯方块游戏 DOS参考代码-s3c44b0x run in the Tetris game DOS reference code
test_rtc
- SUMSUNG S3C44B0X ARM7的一个RTC实时时钟的显示和修改的例程-SUMSUNG S3C44B0X an ARM7 RTC real time clock and the display changes routines
UCOS-II在ARMS3C44B0X上的移植源代码
- UCOS-II在ARM S3C44B0X上的移植源代码。 移植说明: 我没有移植uCOS前,再网上下了一些案例可是大部分都不能直接运行,而且有好多还都有错误。 还发现很多"移植者"是忠实的操洗者,并且还操错了。这个移植代码是我领会不少代码的长短根据自己的经验编制,绝对原著!!!因为有好多与大多数移植代码不同之处,故帖出来共享,希望能对将要移植uCOS的人以启发和帮助。 由于我个人时间不多,所以没有写什么移植的"前因后果"
S3C44B0X例子程序2
- 1. beep -- PWM测试 为 ADS1.2 下编译的项目, 在sdt2.51的ADW里调试,该程序运行后在57600的超级终端里按PC机键盘的“+”“-” 按键,可以听到BUZZ增大减小的声音。 2. key -- 按键测试 为 SDT2.51 下编译的项目, 在sdt2.51的ADW里调试,该程序运行后按FS44B0X上的按键key1 key2 key3 key4 相应的发光二极管亮 3 key
S3C44B0X例子程序1
- 5 ledblink -- 跑马灯程序 该项目在SDT2.51下编译调试。最简单的demo程序,运行后3个发光二极管轮流点亮。 6 timerint -- 定时器中断demo程序 该项目在SDT2.51下编译调试。将子目录timerint拷贝到c:\ 下。 该demo程序的主程序是while空循环,定时器中断服务程序每500ms将3个LED反相。 在57600超级终端里也可以看到中断发生时的信息。
ARMSourceFiles6
- 嵌入式系统设计与开发实例详解--基于ARM的应用(采用ARM7TDMI内核的、三星公司推出的S3C44B0X) 第六部分:ucos_ex2,ucos_ex3,UDPtest,USBN9603demo,USBtest-Embedded System Design and Development example explanation-- ARM-based applications (using ARM7TDMI within nuc
uCOS-II-44B0x(ucos+tftp)
- s3c44b0x上实现的ucos+tftp-s3c44b0x achieve the tftp CENTER
s3c44boxucgui
- 此文件是UCGUI在S3C44B0X上的移植-UCGUI this document is in the transplant S3C44B0X
s3c44b0x+USB
- 1代码. 2.测试步骤 1> 开发板上电 2> 运行测试程序 3> 运行串口监视软件,波特率115200 4> 用usb电缆连接开发板和PC,若已连接,则拔掉重连 5> 系统显示找到新硬件,安装Tools\usb驱动\D12驱动 6> 运行Tools\UsbDebug.exe 7> 刷新设备列表,选中Philips项 8> 将接收数据端点
BEEP-S3C44B0X
- PWM测试程序,运行后通过控制超级终端可以改变频率值及改变发声。-PWM testing procedures after running through control of the Super Terminal can change frequency audible and change.
UART-S3C44B0X
- UART测试。运行程序后在超级终端上将实时显示PC机上键盘的输入字母。-UART test. After running of the Super Terminal will be real-time display on a PC keyboard input letters.
s3c44b0xinChinese
- s3c44b0x的中文手册.rar -s3c44b0x the Chinese manual. Rars3c44b0x the Chinese manual. Rar
ucos-iiusedinS3C44B0XARM7
- 该工程需要用嵌入式系统开发软件ADS1.2 打开 将uc/os-ii操作系统成功移植在S3C44B0X ARM7上 可作为ARM UC/OS-II开发的重要参考-the project needs of embedded system development software ADS1.2 open to uc/os- ii operating system successful transplantation in S3C44