搜索资源列表
u-boot-1.1.6源码下载
- u-hoot-1.1.6,官方源码，解压后为bz2格式，本源码未做任何改动，为官方源码，适合学习，移植之用。
u-boot-1.1.2
- U-Boot1.1.2是最为常用的嵌入式系统Bootloader，这个版本是目前的最新版本-U-Boot1.1.2 is the most commonly used in embedded system Bootloader, this version is the latest version
u-boot-1.1.2.tar
- u-boot1.1.2源码，从sourceforge上下载的，最新的哦！-u-boot1.1.2 source from sourceforge download the latest Oh!
AT91RM9200-Boot
- AT91RM9200的完整启动代码：包括loader, boot及U-boot三部分均已编译通过！欢迎下载使用！-AT91RM9200 complete boot code include : loader, boot and U-boot three parts have been compiled through! Welcome to download use!
u-boot-1.1.4
- linux下的BOOT程序原码,有需要的可以来下,保证好用-procedures under the BOOT original code, we need to be, to ensure ease of use
U-BOOT_and_LINUX
- 做嵌入式开发的，bootloader一般用u-boot 。不会用？？ 那就看看这篇文章吧！~强烈推荐做嵌入式开发的看看！~-so embedded development, Bootloader general use u-boot. Not? ? Then read this article! ~ Strongly recommended the development of the Embedded done! ~
U-BOOT_cmd
- 嵌入式开发的u-boot命令介绍 加快你的开发进度-Embedded Development u-boot your order on accelerating the development progress
u-boot_for_blackfin
- u-boot, 支持bf533处理器，使用blackfin+uclinux的最佳选择。-u-boot support bf533 processor, Basis of Uclinux blackfin use the best choice.
U-Boot44B0-Porting
- U－BOOT是嵌入式系统里面比较常用的bootloader，支持许多平台，比如ARM，PPC等。这个文章详细描述了讲U－BOOT移植到44B0平台的步骤-U-BOOT system is embedded inside the commonest Bootloader. support many platforms, such as ARM, PPC, and so on. This article describes the stre
u-boot-pxa270
- pxa270的u-boot 源代码！很有参考价值-pxa270 of u-boot source code! Useful reference
u-boot-1.1.6
- u-boot-1.1.6可以用于移植，可以使用-u-boot-1.1.6 can be used for transplantation, can be used
u-boot-2011.12.tar.bz2
- u-boot-2011.12,官网标准版，下载后请直接修改名字为u-boot-2011.12.tar.bz2,linux下解压-u-boot-2011.12, the Standard Edition of the official website, download directly modify the name for the u-boot-2011.12.tar.bz2, linux unzip
Burn SD u-boot bin
- Burn SD u-boot bin to SD card for SD booting(6410 SoC based board).
u-boot-2011.09.tar
- u-boot-2011.09。u-boot文件(u-boot-2011.09.tar.bz2)
u-boot-xlnx-xilinx-v2016.3.tar
- u-boot-xlnx-xilinx-v2016.3
PowerPC平台的U-Boot启动分析和移植
- POWER平台的U-Boot启动分析和移植(U-Boot startup analysis and porting of POWER platform)
u-boot-2017.07
- u-boot 07 2017 version linux source file
U-boot源代码分析
- u-boot源代码分析 详细介绍了u-boot源码，可以深入了解u-boot各个功能模块(U-boot source code analysis, detailed descr iption of the u-boot source code, you can thoroughly understand the various functional modules u-boot)
u-boot-2014.04
- u-boot源代码，AM/DM3730开发板资料(U-boot-2014.04 source code)
U-Boot启动第二阶段代码分析
- U-Boot第一阶段的启动流程。(nandflash启动，把nand的4k代码考到sram中，因为nand没址线，不能映射到内存，所以通过sram进行过度，sram中4k代码把整个uboot拷贝到sdram上，初始化好堆栈，为c语言提供条件，进入uboot的第二阶段！ )这个阶段主要是初始化硬件设备，为加载U-Boot的第二阶段代码准备RAM空间最后跳转到lib_arm/board.c中start_armboot函数，这是第二阶段的入口