搜索资源列表
uboot-1.1.1
- uboot，bootload代码-uboot, bootload code
u-boot_1.1.1_for_blackfin.tar
- uboot是一款优秀的嵌入式系统的bootloader程序。本软件包是uboot在ADI公司的blackfin533处理器上的移植。--Uboot is a good bootloader program for embedded system. This software package is a migration of uboot on ADI s blackfin533 CPU.
u-boot-1.1.4.tar.bz2
- u-boot-1.4.4的源代码 适合嵌入式开发的朋友。 因为后缀名不支持bz2，我在后面加上了gz。下载后重命名为bz2的后缀即可-u-boot-1.4.4 source code for embedded development friends. Because the suffix does not support bz2, I insert a gz. After downloading named for the su
uboot.tar
- uboot在arm处理器s3c2410的移植代码，并可以移植到其他处理器上-uboot the arm processor s3c2410 transplant code, and can be transferred to other processors
u-boot-1.2.0.tar
- 截至2007.1的最新版本U-bootloader源代码！欢迎下载使用，下载后将后缀名改为u-boot-1.2.0.tar.bz2解压缩即可！-2007.1 as the latest version of the U-Bootloader source code! Welcome downloading, Download suffix will be changed u-boot-1.2.0.tar.bz2 can decompre
dnw0.98A
- 三星2440-2410 ARM 的Uboot下载上位机源代码-Samsung 2440-2410 ARM Uboot PC download source code
u-boot-1.1.6.tar
- uboot最新版本。可以对比以前版本学习-the latest version of uboot. Contrast to the previous version can be learning
uboot-s3c2410-nand.patch
- uboot-s3c2410-nand.patch.gz。 u-boot 1.2.0 NAND flash 支持。-uboot-s3c2410-nand.patch.gz. u-boot 1.2.0 NAND flash support.
u-boot-1.1.2-col2.tar
- uboot 1.12版的src code,缺省应用于PXA270板，from colibry.-uboot 1.12 version of the src code, the default applies to PXA270 board, from colibry.
u-boot-1.1.4_twarm.tar
- uboot for twarm board
u-boot-1.1.5_atmel_1.4
- 这是uboot1.1.5的一个补丁，打上这个补丁可以使uboot支持at91sam9260的开发板。 在EBD9260-p开发板上移植u-boot1.1.5可以从ATMEL的一块demo板（at91sam9260ek）的uboot文件里修改而得。其实1.1.5的uboot并不支持ATMEL的at91sam9260ek，只支持at91rm9200ek，通过ATMEL官方提供的u-boot-1.1.5_atmel_1.4.diff.bz
u-boot-1.3.0
- 针对S3C2410X移植的UBOOT-1.3.0，带网络通讯TFTP，可通过网络下载内核，使用时把.gz改为.tar.bz2，在linux下编译-S3C2410X transplantation for UBOOT-1.3.0, with network communications TFTP, can be downloaded through the network core, when used to. Gz changed. T
u-boot-1.1.6-20090119.tar
- u-boot-1.1.6 for mini2440开发板。 支持网络下载，支持usb下载。基于友善之臂开发板。-u-boot-1.1.6 for mini2440
Uboot-1.1.2_for_PXA270
- 把uboot1.1.2板移植到intel xscal pax270 mcu 上。很实用，有兴趣的不凡看看。-Uboot1.1.2 plate to migrate to the intel xscal pax270 mcu. Practical, interested to see out of the ordinary.
u-boot-1.3.1.tar
- uboot 源码，版本 1.3.1This directory contains the source code for U-Boot, a boot loader for Embedded boards based on PowerPC, ARM, MIPS and several other processors, which can be installed in a boot ROM and used to init
u-boot-1.3.4_onenand090812.tar
- s3c6410支持Onenand启动的uboot
uboot1.1.1(2010.4.13)
- uboot1.1.1在YL9200开发板上移植成功，这个用到得loader.bin boot.bin u-boot.bin u-boot.bin.gz-uboot1.1.1 development board in YL9200 transplantation, the use may loader.bin boot.bin u-boot.bin u-boot.bin.gz
u-boot-1.1.6_20100601
- WinCE 6.0 uboot源码 uboot中的内核分区划分为3MB，基本上满足了越来越大的内核镜像的需要，同时提供了TFTP下载功能的一键式菜单；-uboot
uboot-imx-rel_imx_4.1.15_2.1.0_ga
- im6ull uboot 源码，可以自定义启动方式。(Im6ull uboot source code, you can customize the way to start.)