搜索资源列表
pinlvji
- 本例子是采用定时计数器1实现精确定时1S，然后测量脉冲个数，从而得出频率-This example is used from time to time to achieve an accurate timing counter 1S, and then measuring the number of pulses so as to arrive at the frequency of
test2-2
- 本程序用来演示定时器0和定时器1的工作 定时器0定时1s 定时器1定时0.5s 分别按这个两个时为间隔在两个数码管上显示0~F-This procedure is used to demonstrate Timer 0 and Timer 1 Timer 0 Timer 1s the work of a regular 0.5s timer respectively when the two intervals in the
timer_RTC
- 定时器timer0定时1S，控制SPI显示 中断方式 RTC采用秒中断控制UART0通讯 查询方式 外部中断INT1、INT2控制LED显示 其中INT1控制亮，INT2控制灭-Timer timer timer0 1S, control display interrupt RTC SPI interrupt control UART0 communication using second inquiry means exter
1S-count
- keil 3 实现的定时计算1S钟，有需要的可以联系我 哈哈 为什么要20字- keil 3 realize fixed time calculates the 1S clock
msp430pwm
- MSP430占空比可变的PWM波程序,设定一个变量来选择初始占空比，然后通过Timer_B定时1s，每隔一秒改变一次占空比，生成占空比可变的PWM波。 -PWM duty cycle alterable.
Frequency
- PIC （PIC16F886） 做的简单频率计 用TMR0定时1s，将待测信号从T1CKI脚输入，用TMR1进行计数，读出TMR1H，TMR1L的值就是频率 单片机：PIC16F886 显示：LCD1602 编程语言：PIC C 附Proteus仿真。-PIC (PIC16F886) to do a simple frequency counter TMR0 timer with 1s, the t
AVRtimer
- AVR单片机定时器1用法例程，及中断，通过测试成功 定时1s程序-AVR microcontroller timer 1 routine usage, and interrupt, timer 1s successfully passed the test procedures
Pulse-test
- 脉冲检测：51单片机12M晶振精确定时1S ，P3.2口用来接外部脉冲，并将检测次数显示在LCD1602上！-Pulse test: 51 SCM 12 M crystals precise timing 1 S, P3.2 mouth used to pick up external pulse, and will be testing number displayed in the LCD1602!
shizhong
- 用msp430定时1s使led灯点亮一次，这个小程序可用来指示串行通信中数据的发送-1 s make timing with msp430 led light once, this small program can be used to show serial communication in data sent
ALIENTEK-MINISTM32
- stm32 lcd帧统计例程在timer.c中增加了一个全局变量，通过定时器定时1s钟，然后统计这个时间内LCD的刷屏次数，再通过串口打印出来刷屏的速率。-stm32 lcd fr a me statistical routines increase in timer.c in a global variable timer timer 1s bell, and then statistics this time, the LCD re
timer_A--1s
- 实现msp430G25531秒的定时，并且让LED实现2秒的亮灭-To achieve msp430G25531 second time, and allow the LED to achieve two seconds off bright
cc2530-External-Interrupt
- zigbee编程，cc2530实现led定时1S闪烁！-Zigbee programming, cc2530 realize led timing 1 s flicker
msp430pwm
- 设定一个变量来选择初始占空比，然后通过Timer_B定时1s，每隔一秒 改变一次占空比，生成占空比可变的PWM波。-To set a variable to select initial duty cycle, and then through the Timer_B timing 1s, every second to a change in duty cycle, generation of PWM wave variabl
LED_0.5s
- 在IAR环境下编写msp430f4152源码，通过捕获比较准确定时1s，实现灯亮0.5S，灭0.5s。-In the IAR environment to prepare msp430f4152 source, by capturing more accurate timing of 1s, to achieve lights 0.5S, off 0.5s.
avr-timer0
- 使用iar for avr编译器，定时器0，精确定时1S，使LED灯闪烁,实测频率为0.983HZ -Use iar for avr compiler, use the timer 0, precise timing 1S, the LED light flashes, the measured frequency is 0.983HZ
Time0-make-1s
- 程序自动生成1是的定时器，炒作简单快捷，容易上手东莞反对政府-The program automatically generates a timer is speculation simple and quick, easy to use! !
Timer2-1s
- 定时器2定时1s改变LED状态，LED灯亮灭状态各持续1秒钟。(Timer 2, timing 1s, change the LED status, LED lights on the state, each lasted 1 seconds.)
PCA定时
- 采用stc系列的pca模块模拟定时器，pca用来当做定时器定时1S。(The STC module is used to simulate the timer, and the PCA is used as the timer and timing 1S. Pca.)
stm8s103k3t6定时器2定时1s改变灯的状态
- stm8s103k3t6定时器2中断计数，1.0024sLED亮，1.0024sLED灭，PD4输出。(Stm8s103k3t6 timer 2 interrupt count, 1.0024sLED bright, 1.0024sLED out, PD4 output.)
定时数码管显示1~9999
- 基于51单片机的定时计数器，每隔1s数码管显示加1，可用4位数码管直接加到9999(Based on 51 single-chip timer counter, every 1s digital tube display plus 1)