搜索资源列表
6713flashburn_software
- 实现TMS320C6713的Flash烧写程序,可以使用,仅供参考-TMS320C6713 Flash burn
NorFlash
- nor flash 烧写程序 lpc2478 iar环境的-nor flash programmer lpc2478 iar environment procedures
Flash
- S3C44B0的板子上实现FLASH烧写的源码-S3C44B0 the FLASH programmer board to achieve the source
stm32_update
- 通过手动烧写flash,实现了stm32的自动更新功能,用户可以再本例程的基础上修改实现通过串口或者网络实现程序的自动更新-Programmer manual flash, achieved stm32 the Automatic Updates feature, users can no longer based on the routine adoption of amendments to the realization of t
USB
- 利用USB烧写芯片的驱动,可供笔记本电脑或无并口新买电脑使用-USB programmer to use the driver chips for notebook computers with or without the use of parallel computers to buy new
UBoot_Flash_ReadMe
- Spearhead2000的uboot烧写方法-Method of Spearhead2000 programmer uboot
stc-isp-v4.80-not-setup
- 最新版宏晶全系列单片机烧写软件,本软件为免安装版解压完即可用stc-isp-v4.80-not-setup-The latest version of a full range of single-chip crystal macro programmer software, the software version installed in order to avoid decompression can be used after
C5402Boot
- C5402DSP汇编编写的C5402的自举程序,包含了FLASHROM的烧写程序。-C5402 prepared C5402DSP compilation of the bootstrap procedure, the programmer includes FLASHROM process.
Hex2Bin
- 快速地将16进制转换为2进制文件,在很多要烧写程序的时候会用到.-Convert Hex file to Bin file
f9af4981-587e-4e54-9ad3-05b10382c49d
- 语音录放模块,你可以自己烧写程序上去,课录音十万次 -Voice recording module, you can go their own procedures programmer, recording thousands of times class
serial
- 单片机串口通讯C程序,直接编译烧写进芯片即可-Single-chip serial communication C procedures,
C6455FlashEraseandBurn
- TI 最新的1.2G DSP TMS320C6455的bootloader的烧写程序,对DSP开发非常有用。-TI latest 1.2G DSP TMS320C6455 programmer of the bootloader program, very useful for DSP development.
dspC6713Flashburn
- DSPTMS320C6713的Flash烧写方法-failed to translate
s3c44b0x-boot
- 这是个S3C44B0的boot源代码程序,调试通过,并且烧写能成功运行的BOOT-This is a S3C44B0 source code of the boot process through the debugger and programmer can successfully run the BOOT
9260-FLASHPGM
- 针对于at91sam9260环境下norflash烧写软件-At91sam9260 environment for the software programmer norflash
arm
- ARM_Star 仿真器是一款为广大ARM工作者设计的高性能仿真器,ARM_Star仿真器完全实现ARM RDI 1.5和RDI 1.51协议,与ARM Multi-ICE™ 兼容,支持所有含有Embedded-ICE Logic的ARM 内核CPU, 在调试软件的控制下,ARM_Star仿真器可以停止、启动ARM CPU的运行,用户通过ARM_Star仿真器察看、修改寄存器,存储器,设置断点、单步执行,下载烧写Flash程序
SJF
- 申延超_嵌入式Linux应用开发完全手册笔记_NAND Flash 烧写工具 SJF 安装使用-NAND Flash Tool SJF
main
- LED灯循环显示的源代码,用的是LPC2119的板子和飞利浦的烧写器-LED show lighting
TPLinkUSB
- TP-Link USB无线网卡首先烧写zImage文件;其次把rt73.ko、rt73.bin、rt73sta.dat这三个文件下载到目标板上的/tmp目录下面;然后insmod /tmp/rt73.ko加载模块;最后通过命令ifconfig rausb0 192.168.3.100 up启用USB无线网卡。-TP-Link USB wireless network adaptor
Jflash
- Jflash 是 Linux 平台上用来烧写程序到 ARM 平台的一个工具,它涉及到很多底层硬件-Linux platform is Jflash programmer used to program a tool for ARM platform, which involves a lot of the underlying hardware