资源列表

« 1 2 ... 9 10 11 12 13 1415 16 17 18 19 ... 4311 »

[VHDL编程statem

说明:元件例化与层次设计,verilog 实例说明-components cases with the level of design, Verilog example
<赵英军> 在 2024-06-07 上传 | 大小:1024 | 下载:0

[VHDL编程sineROM

说明:自己写得一个关于sine(32X24)的程序-own written on a sine (32X24) procedures
<皮桂> 在 2024-06-07 上传 | 大小:1024 | 下载:0

[VHDL编程shift_split_data

说明:关于一个串行数据输入 根据时序将数据分两路输出的程序 -on a serial data input timing will be based on output data using two procedures
<皮桂> 在 2024-06-07 上传 | 大小:1024 | 下载:0

[VHDL编程FTCTRL

说明:四位十进制频率计的顶层控制模块,用于生成测频需要的复位及控制信号-four decimal frequency of top-level control modules, used to generate the required frequency measurement and control signals reset
<萧飒> 在 2024-06-07 上传 | 大小:1024 | 下载:0

[VHDL编程beipin

说明:用verilog写的cpld的各种分频程序,希望大家指正,谢谢!-using Verilog cpld written by the various sub-frequency procedures in the hope that we stand corrected, thank you!
<沈柱> 在 2024-06-07 上传 | 大小:1024 | 下载:0

[VHDL编程Cpu_model

说明:Verilog HDL编写的CPU模型,很经典,比较通用-Verilog HDL prepared by the CPU model, classic, more generic
<wyl> 在 2024-06-07 上传 | 大小:1024 | 下载:0

[VHDL编程8LEDverilog

说明://led.v /*------------------------------------- LED显示模块:led(CLK,AF,ADDR,DATA) 功能: 显示 注意事项: 8位LED 参数: CLK:扫妙时钟输入,推荐1kHz AF:数码管输出,a~h ADDR:数码管选择位数出,0~2 DATA:显示数据输入0~9999 9999 编写人: 黄道斌 编写日期:
<黄道斌> 在 2024-06-07 上传 | 大小:1024 | 下载:0

[VHDL编程sram

说明:sram 读写小程序,用verilog编写的,请各位高手指教-SRAM read and write small programs using Verilog prepared, please enlighten you master
<kevin> 在 2024-06-07 上传 | 大小:1024 | 下载:0

[VHDL编程jop_core_cache

说明:JOP的内核缓存源码,不易找到,大家一定要顶啊-JOP kernel source code cache, not easy to find, we must kits
<黄肖超> 在 2024-06-07 上传 | 大小:1024 | 下载:0

[VHDL编程jop_core_arom

说明:这是最后一个,处理器内部ROM,如有需要,大家就顶-this is the last one, the processors internal ROM, if necessary, on the top you
<黄肖超> 在 2024-06-07 上传 | 大小:1024 | 下载:0

[VHDL编程I2CSlave

说明:Verilog HDL实现的I2C Slave模拟-achieve the Verilog HDL simulation I2C Slave
<lzy> 在 2024-06-07 上传 | 大小:1024 | 下载:0

[VHDL编程lru_new

说明:采用LRU替换算法。这种算法选择最久没有被访问的块作为被替换的块。 为了实现LRU算法,要在块表中为每一块设置一个计数器(cnt0,cnt1,cnt2,cnt3,)。计数器的长度为2位。-using LRU replacement algorithm. This algorithm to choose the most long visit is not being replaced as a block by block. To
<wangjiao> 在 2024-06-07 上传 | 大小:1024 | 下载:0
« 1 2 ... 9 10 11 12 13 1415 16 17 18 19 ... 4311 »

源码中国 www.ymcn.org