文件名称:emWin-Tutorial
介绍说明－－下载内容均来自于网络，请自行研究使用
本教程配套的硬件开发平台是安富莱电子自主设计的STM32-V5开发板。安富莱其他系列的STM32开发板也可以使用这个手册，
后面把相应的工程附上。不过需要大量动态内存的例子是无法运行的。
使用本教程前，请先按照第三章的教程进行触摸校准，将触摸参数保存到EEPROM里面，后面所有的例子都会自动加载触摸参数。
* 基本涵盖了所有STemWin知识点及其控件的使用，部分复杂的控件会在后期升级的教程中增加上去。
* 完美解决STemWin支持的BMP、JPG、GIF、PNG图片显示。
* 完美解决STemWin支持的字体显示，XBF、SIF、矢量字体显示。
* 教程中提供的emWin的移植方法，可以完美支持各种显示屏，不受官方显示驱动限制。
* 所有的控件教程都有配套使用GUIBulder5.22和uCGUIBulder4.0建立的例子。
* 大部分例子均支持在模拟器、MDK和IAR三个版本上面运行-This tutorial supporting hardware development platform is Ann Fuller electronic self-designed development board STM32-V5. Ann Fuller other series STM32 development board can also use this manual,
Behind the corresponding project attached. But it needs a lot of examples of dynamic memory is not running.
Before using this tutorial, please follow the tutorial in Chapter III touch calibration parameters will be saved to the EEPROM inside the touch, after all examples are automatically loaded touch parameters.
* Basically covers all the knowledge points using STemWin its controls, some complex controls will increase up late in the upgrade tutorial.
* Perfect solution STemWin supports BMP, JPG, GIF, PNG picture is displayed.
Font support* perfect solution STemWin show, XBF, SIF, vector font.
* Transplantation emWin tutorial provided perfect support for a variety of displays, display drivers from the official limit.
* All of the controls supporting the use GUIBulder5.22 tutorial
后面把相应的工程附上。不过需要大量动态内存的例子是无法运行的。
使用本教程前，请先按照第三章的教程进行触摸校准，将触摸参数保存到EEPROM里面，后面所有的例子都会自动加载触摸参数。
* 基本涵盖了所有STemWin知识点及其控件的使用，部分复杂的控件会在后期升级的教程中增加上去。
* 完美解决STemWin支持的BMP、JPG、GIF、PNG图片显示。
* 完美解决STemWin支持的字体显示，XBF、SIF、矢量字体显示。
* 教程中提供的emWin的移植方法，可以完美支持各种显示屏，不受官方显示驱动限制。
* 所有的控件教程都有配套使用GUIBulder5.22和uCGUIBulder4.0建立的例子。
* 大部分例子均支持在模拟器、MDK和IAR三个版本上面运行-This tutorial supporting hardware development platform is Ann Fuller electronic self-designed development board STM32-V5. Ann Fuller other series STM32 development board can also use this manual,
Behind the corresponding project attached. But it needs a lot of examples of dynamic memory is not running.
Before using this tutorial, please follow the tutorial in Chapter III touch calibration parameters will be saved to the EEPROM inside the touch, after all examples are automatically loaded touch parameters.
* Basically covers all the knowledge points using STemWin its controls, some complex controls will increase up late in the upgrade tutorial.
* Perfect solution STemWin supports BMP, JPG, GIF, PNG picture is displayed.
Font support* perfect solution STemWin show, XBF, SIF, vector font.
* Transplantation emWin tutorial provided perfect support for a variety of displays, display drivers from the official limit.
* All of the controls supporting the use GUIBulder5.22 tutorial
(系统自动生成,下载前可以参看下载内容)
下载文件列表
安富莱STM32-V5开发板STemWin教程1-60期.pdf