资源列表
排序选择:
[DSP编程] 02_GpioLed02
说明:将PWM1-PWM6引脚配置为I/O口,方向为输出。在GPIOLed01.pjt的基础上, * 通过使用T1定时器的周期中断,每隔1s改变一次LED灯亮或者灭这种状态 * 所保持的时间,也就是说改变了LED灯闪烁的频率-The PWM1-PWM6 pin is configured as I/O port direction for output. On the basis of the GPIOLed01.pjt,* the timer by using the T1 period i<geqingqing> 在 2025-09-27 上传 | 大小:222kb | 下载:0
[DSP编程] 03_EvPwm01
说明:EVA的通用定时器T1和T2运行在连续增计数模式,EVB的通用定时器T3和T4运行 * 在连续增/减计数模式,各全比较单元输出的PWM波形具有死区,死区时间为 * 4.27us。-EVA timers T1 and T2 General run in a continuous increase in counting mode, EVB timers T3 and T4 general run* in a row up/down counting mode, each full comp<geqingqing> 在 2025-09-27 上传 | 大小:217kb | 下载:0
[嵌入式Linux] uclinuxserialdriver
说明:串口驱动源代码,是在ucLinux开发的,希望能够帮助大家学习驱动开发-Serial driver source code, developed in ucLinux, hoping to help people learn-driven development<shmily> 在 2025-09-27 上传 | 大小:26kb | 下载:0
[DSP编程] 04_EvPWM02
说明:EVA下面的通用定时器T1工作于连续增/减计数模式,产生对称的PWM波形。通过 * T1的周期中断来计时,每隔1s钟改变1次占空比。死区时间为4.27us。-EVA the following general-purpose timer T1 operates in continuous up/down counting mode, resulting in symmetric PWM waveform. By* T1 interrupt the cycle time, clock chan<geqingqing> 在 2025-09-27 上传 | 大小:217kb | 下载:0
[DSP编程] 07_Sci02
说明:本实验中SCIA模块的发送和接收采用中断方式实现,空闲线模式波特率为19200, * 通信数据格式为1位停止位,8位数据位,无校验位-This experiment SCIA transmit and receive modules achieved by interrupt, idle line mode the baud rate is 19200,* communication data format is 1 stop bit, 8 data bits, no parity<geqingqing> 在 2025-09-27 上传 | 大小:338kb | 下载:0
[软件工程] ContentServer
说明:矢量控制与直接转矩控制是当前主要的两种电机变频调速控制方法,已在两相交流感应电机中得到 了应用。分析了两相不对称电机矢量控制和直接转矩控制原理以及两相三桥臂逆变器的SVPWM实现方法; 运用Matlab的Simulink建立了两相不对称交流感应电机矢量控制和直接转矩控制调速系统的仿真模型,并 对两种控制系统进行了仿真研究,给出了仿真波形,进行了特性比较. 关键词:两相电机;矢量控制;直接转矩控制;SVPWM;MATLAB;仿真-Vector Control and Direct<卢维津> 在 2025-09-27 上传 | 大小:150kb | 下载:0
[JSP源码/Java] com
说明:纯jsp数据库登录添加,修改,删除。帮助初学者利用简单的jdbc连接access数据库。-Pure jsp database login to add, modify, delete. To help beginners with simple access database jdbc connection.<风秋雨> 在 2025-09-27 上传 | 大小:13kb | 下载:0
[软件工程] New-Microsoft-Office-Word-Document
说明:its lms1 algorithm.very useful to calculate end points in the leaning curves and also requires less no.of iterations.<don> 在 2025-09-27 上传 | 大小:10kb | 下载:0