资源列表

« 1 2 ... .08 .09 .10 .11 .12 31013.14 .15 .16 .17 .18 ... 33928 »

[其他嵌入式/单片机内容CAN_Sender

说明:基于12xs128 can通讯 发送方主程序-sender main program based on MC9S12XS128 MSCAN
<王小帅> 在 2025-06-18 上传 | 大小:260kb | 下载:0

[其他嵌入式/单片机内容ADC

说明:XS128的A/D模块编程 利用两个AD口分别于电位器连接,调节电位器,将采集到的值通过串口发送到PC-A/D XS128 module programming using two AD ports are connected to potentiometer, adjust potentiometer, the collected value through the serial port to send to PC
<王小帅> 在 2025-06-18 上传 | 大小:256kb | 下载:0

[其他嵌入式/单片机内容SPI-Master

说明:本工程为SPI通信主机程序,用来开启一个SPI传输与从机通信使用两个相同的XS128核心板-This project for the SPI communication host program, used to open a SPI transmission and communication the machine using the same XS128 core board two
<王小帅> 在 2025-06-18 上传 | 大小:264kb | 下载:0

[嵌入式Linuxsrtp_1.4.5

说明:安全传输的RTSP程序,用于需要加密安全传输的场合-secuirity RTSP, transfer data/stream
<luozi> 在 2025-06-18 上传 | 大小:309kb | 下载:0

[单片机(51,AVR,MSP430等)main

说明:c8051f410的ADC转换程序,以及一些初始化的寄存器的相关的配置-the ADC program of the c8051f410,and config the resigner
<胡总> 在 2025-06-18 上传 | 大小:2kb | 下载:0

[嵌入式/单片机编程src_bmp2table[V1.3][Eclipse]

说明:自己写的工具,将图片转换为数据表格,以供显示于LCD模块上-own tools, the picture is converted to data tables for display on the LCD module
<Yang> 在 2025-06-18 上传 | 大小:7kb | 下载:0

[其他嵌入式/单片机内容rf905

说明:文件是NRF905驱动文件,包含头文件可直接是用-NRF905 driver files, including header files can be used directly
<屈伟> 在 2025-06-18 上传 | 大小:2kb | 下载:0

[单片机(51,AVR,MSP430等)cookyshop

说明:基于nrf24l01和stc89c52的无线温度采集系统 可在windows和linux下使用sdcc编译-nrf24l01 stc89c52 sdcc
<walnut> 在 2025-06-18 上传 | 大小:59kb | 下载:0

[单片机(51,AVR,MSP430等)LCD1602

说明:使用sdcc编译的stc89c52的1602LCD驱动例程,可使用windows和linux两种环境编译-1602LCD demo for stc89c52,use sdcc to compile the project,use makefile to management the project
<walnut> 在 2025-06-18 上传 | 大小:6kb | 下载:0

[单片机(51,AVR,MSP430等)car

说明:单片机避障小车,能实现基本的避障功能,上面有三个超声波-MCU obstacle avoidance car, can realize the basic function of obstacle avoidance, the above three ultrasound
<李最美> 在 2025-06-18 上传 | 大小:15kb | 下载:0

[单片机(51,AVR,MSP430等)four-axis-master

说明:基于nuc120的四轴控制程序,包含了mpu6050驱动,nrf24l01通信。-fou-axis controller program based on nuvoton nuc120
<郑嘻嘻> 在 2025-06-18 上传 | 大小:7.84mb | 下载:0

[微处理器(ARM/PowerPC等)duoji

说明:基于51单片机的舵机控制程序,实现舵机角度控制-Based on 51 single-chip servo control program,Achieve steering angle control
<wnl> 在 2025-06-18 上传 | 大小:18kb | 下载:0
« 1 2 ... .08 .09 .10 .11 .12 31013.14 .15 .16 .17 .18 ... 33928 »

源码中国 www.ymcn.org