资源列表
[嵌入式Linux] minigui_AT91RM9200_port
说明:minigui在AT91RM9200上的成功移植,已经加了注释,minigui顺利跑在板子上。-minigui in AT91RM9200 successful transplantation, has been added to the Notes, minigui smooth run on the board.<xiaozhou_163> 在 2025-11-09 上传 | 大小:35kb | 下载:0
[单片机(51,AVR,MSP430等)] 51clock
说明:c语言写的51电子钟,在51单片机上实现电子钟的功能,需要的就下吧-c language of 51 electronic clock, single-chip microcomputer in 51 minutes on the realization of electronic functions, the needs of the next bar<李毅> 在 2025-11-09 上传 | 大小:2kb | 下载:0
[单片机(51,AVR,MSP430等)] lcm_initial
说明:用串行通信实现的液晶ST7920的初始显示,我也是调了好久才出来的,希望对大家有用-Using serial communication to achieve the initial ST7920 LCD display, I am also out of tune for a long time before, and I hope useful for all of us<李毅> 在 2025-11-09 上传 | 大小:1kb | 下载:0
[单片机(51,AVR,MSP430等)] ds1302
说明:电子时钟DS1302的程序,我是让它跑起来了,大家应该也能用起来-Electronic Clock DS1302 procedure, I was running it up, we should also use up<李毅> 在 2025-11-09 上传 | 大小:1kb | 下载:0
[微处理器(ARM/PowerPC等)] DATARET
说明:在LPC2104上实现串口发送的程序,用的编译环境为ADS1.2-In the LPC2104 to achieve serial transmission procedure, used by the compiler environment ADS1.2<李毅> 在 2025-11-09 上传 | 大小:48kb | 下载:0
[微处理器(ARM/PowerPC等)] SENDSTR
说明:在LPC2104上实现串口发送及接收的程序,从PC送数据到LPC2104上,然后返回发送的数据。用的编译环境为ADS1.2-LPC2104 achieved in the serial send and receive procedures, from the PC to send data to the LPC2104, and then return to send data. Compiler environment used for ADS1.2<李毅> 在 2025-11-09 上传 | 大小:50kb | 下载:0
[单片机(51,AVR,MSP430等)] GJ200SCHandPCB
说明:广州古晶电子的单片机学习板资料 单面板PCB、原理图!USB转串口的,只要有USB口的电脑都可以做单片机开发!-Canton ancient crystal electronic learning board microcontroller information sheet panel PCB, schematic diagram! USB to serial, as long as the computer USB port can be done to develop single-c<孙行者> 在 2025-11-09 上传 | 大小:400kb | 下载:0
[微处理器(ARM/PowerPC等)] SPIDISP
说明:在LPC2104上实现SPI的功能,向SPI器件74595发送数据。用的编译环境为ADS1.2-SPI in LPC2104 to achieve the functions of SPI devices to send data 74595. Compiler environment used for ADS1.2<李毅> 在 2025-11-09 上传 | 大小:52kb | 下载:0
[单片机(51,AVR,MSP430等)] LCD_1602_TEST_c
说明:Keil51开发环境 用C写的 GJ-200U单面板上的源码,1602LCD测试显示。全部文档。-Keil51 development environment using C to write the GJ-200U-source single-sided board, 1602LCD tests. All documents.<孙行者> 在 2025-11-09 上传 | 大小:10kb | 下载:0
[VHDL编程] uart.core.for.FPGA
说明:一个UART的FPGA core,附有详细的代码阅读笔记-A UART of the FPGA core, accompanied by a detailed code of reading notes<获得> 在 2025-11-09 上传 | 大小:600kb | 下载:0