资源列表
[单片机(51,AVR,MSP430等)] 802.11_Wireless_Networks
说明:802.11协议指南英文版,比较全面,可以作为开发中的报文格式参考-802.11 Guide to English, more comprehensive, can be used as message format developed in the reference<richard> 在 2025-11-22 上传 | 大小:3.46mb | 下载:0
[单片机(51,AVR,MSP430等)] JCM12232B
说明:51驱动12232程序很好用的,经过测试很好用-12 232 51 driver with a good program, tested very well with<asd> 在 2025-11-22 上传 | 大小:2kb | 下载:0
[VHDL编程] mem64_to_pcitarget_verilog
说明:This design example shows possible interface between instantiation of Altera s 64-bit pci target megafunction and 64-bit synchronous memory -This design example shows possible interface between instantiation of Altera s 64-bit pci target megafunctio<minitman> 在 2025-11-22 上传 | 大小:26kb | 下载:0
[VHDL编程] pcitarget_disconnect_verilog
说明:This design shows how to implement a disconnect of a pci target instantiation of Altera s pci megafunction<minitman> 在 2025-11-22 上传 | 大小:18kb | 下载:0
[Windows CE] COM_Ctrl
说明:串口接口的测试程序,用于在WINCE下的网络测试-TCP interface of test procedures<jun> 在 2025-11-22 上传 | 大小:210kb | 下载:0
[单片机(51,AVR,MSP430等)] VVVF
说明:C8051实现台达变频器驱动和控制,Modbus协议,Keil下编译通过。-C8051 for Delta inverter drive and control, Modbus protocol, Keil compile.<王勇> 在 2025-11-22 上传 | 大小:1kb | 下载:0
[单片机(51,AVR,MSP430等)] can-232
说明:51单片机实现CAN总线和RS232协议之间的转换,内含SJA1000驱动程序,keil下编译通过。-51 MCU CAN bus and RS232 protocol conversion between, containing SJA1000 driver, keil compile.<王勇> 在 2025-11-22 上传 | 大小:40kb | 下载:0
[单片机(51,AVR,MSP430等)] test
说明:控制小车延黑线行进,同时在规定时间内停车-Control car black line extension of the road, and parking within the specified time<王强> 在 2025-11-22 上传 | 大小:23kb | 下载:0
[单片机(51,AVR,MSP430等)] Printer
说明:C8051实现伟煌针式打印机驱动和打印,串行接口,Keil环境下实现。-Wei Huang achieve C8051 printer driver and print stylus, serial interface, Keil environment to achieve.<王勇> 在 2025-11-22 上传 | 大小:1kb | 下载:0
[单片机(51,AVR,MSP430等)] TempratureControl
说明:51单片机实现温度控制,采用12位ADC Max197作输入,PID调节,12位DAC AD7541作输出。-Temperature control 51 single chip, using 12-bit ADC Max197 for input, PID regulation, 12-bit DAC AD7541 for output.<王勇> 在 2025-11-22 上传 | 大小:46kb | 下载:0
[嵌入式/单片机编程] MSP430_GPIO_Based_I2C_Drivers
说明:MSP430 GPIO based I2C Driver. This Drivers can be used to built a software I2c by selecting the two general purpose input/out pins. Just change the port pins in the driver and set your system required pins to set driver work.-MSP430 GPIO based<Raj> 在 2025-11-22 上传 | 大小:2kb | 下载:0