[单片机(51,AVR,MSP430等)] Voice-Recorder-WCG160100

说明：Msp430FG4618单片机做成的语音录放机，语音数据被记录在片内Flash ,语音的录和播放都是采用DMA来操作，这样可以让CPU处于低功耗模式。-This software demonstrates voice recording and playback using an MSP430FG4618 MCU. Audio is recorded and stored using in-system self- programming into Flash memory until the
<顶顶> 在 2025-09-29 上传 | 大小：308kb | 下载：0

[DSP编程] chabiaofft

说明：通过查表法来实现fft中的sin和cos，大大加快了程序的速度-Watch by the law to implement fft of sin and cos, and has been greatly speeded the speed
<njj> 在 2025-09-29 上传 | 大小：2kb | 下载：0

[单片机(51,AVR,MSP430等)] FG4618-RTC-WCG160100

说明：采用MSPFG4618单片机板子做成的一个低功耗的实时时钟，单片机处于低功耗模式，程序由IAR Embedded Workbench 3.42编译-MSP430FG4618 Experimenter s Board Real Time Clock in Low-power mode，Built with IAR Embedded Workbench Version: 3.42A
<顶顶> 在 2025-09-29 上传 | 大小：302kb | 下载：0

[微处理器(ARM/PowerPC等)] qxwfft

说明：基于STM32的全相位FFT相位差测量系统，很好的论文，值得大家参考-Stm32 based on the phase by phase fft measurement system, a good paper, it is worth everybody
<njj> 在 2025-09-29 上传 | 大小：541kb | 下载：0

[单片机(51,AVR,MSP430等)] Capacitive-Touch-Pad-SegLCD

说明：这是一个有MSP430FG4618实验板做成的电容触摸按键程序，其中触摸按键由IIc协议从从机MSP430F2013读出，然后送到LCD显示- A program for the MSP430FG4618 on the Experimenter s board to accept I2C information from the touchpad, display it numerically on the LCD, and send it to a host PC for graphical
<顶顶> 在 2025-09-29 上传 | 大小：2.1mb | 下载：0

[单片机(51,AVR,MSP430等)] Wireless-interface-using-MSP430

说明：本实验针对 CC1100 和CC2500，演示简单的通讯过程，通过按键无线控制LED 的亮灭。本实验板是华凡的MSPFG4618实验板。-In this study, for CC1100 and CC2500, demonstrate a simple communication process, by controlling the LED light button wireless off. In this study, where the board is China s MSPFG46
<顶顶> 在 2025-09-29 上传 | 大小：300kb | 下载：0

[VHDL编程] I2C_vhdl

说明： IMPORTANT NOTE: This design uses the I2C SCL signal as a clock. This requires that the SCL signal have clean, fast edges on both the rising and falling edges of this signal. Slow rise and fall times on this signal can show noise effects whic
<vijendra pal> 在 2025-09-29 上传 | 大小：830kb | 下载：0

[VHDL编程] manchester_verilog

说明： This design is targeted to the XCR3064XL-7VQ100C CoolRunner CPLD. This is a 3V, 64 macrocell device in a 100 VQFP package. The fitter was allowed to pick the pin-out for the device.
<vijendra pal> 在 2025-09-29 上传 | 大小：10kb | 下载：0

[VHDL编程] manchester_vhdl

说明：This design is targeted to the XCR3064XL-7VQ100C CoolRunner CPLD. This is a 3V, 64 macrocell device in a 100 VQFP package. The fitter was allowed to pick the pin-out for the device.
<vijendra pal> 在 2025-09-29 上传 | 大小：11kb | 下载：0

[VHDL编程] spi_cpld_vhdl

说明：The CoolRunner-II "Confuguring Xilinx FPGAs with SPI Flash Memories using CoolRunner-II CPLDs" reference design is based upon the STMicroelectronics SPI Flash memory M25P20. This design can be easily modified to support other families of S
<vijendra pal> 在 2025-09-29 上传 | 大小：431kb | 下载：0

[VHDL编程] uart_verilog

说明：The UART design was designed from a standard uart function with a read/write microprocessor interface. It includes standard framing error, parity control and overrun detection. This design is targeted to the XCR3128XL-7VQ100C CoolRunner CPLD. This
<vijendra pal> 在 2025-09-29 上传 | 大小：5kb | 下载：0

[VHDL编程] uart_vhdl

说明：The UART design was designed from a standard uart function with a read/write microprocessor interface. It includes standard framing error, parity control and overrun detection. This design is targeted to the XCR3128XL-7VQ100C CoolRunner CPLD. This
<vijendra pal> 在 2025-09-29 上传 | 大小：6kb | 下载：0