资源列表
[单片机(51,AVR,MSP430等)] led
说明:实验班上电时,数码管不显示,顺序按下矩阵键盘后,数码管上依次显示0~F,六个数码管同时静态显示即可。-Experimental class power, the digital tube does not show the order of matrix keyboard is pressed, the digital tube followed by 0 to F, six digital tube and static display can.<shejizhe08> 在 2025-07-22 上传 | 大小:1kb | 下载:0
[微处理器(ARM/PowerPC等)] STM32_ADC
说明:基于STM32的AD模-数转换试验,初学者可以了解STM32的模数转换器的使用-AD mode based on the STM32- digital conversion test, the beginner can understand the use of the STM32 ADC<feng> 在 2025-07-22 上传 | 大小:2.08mb | 下载:0
[单片机(51,AVR,MSP430等)] ad
说明:用单片机控制ADC0804进行数模转换,当拧动实验板上A/D旁边的电位时,在数码管的前三位以十进制方式显示出A/D转换后的数字量(8位A/D转换后数值在0~255变化)。-SCM ADC0804 digital to analog conversion, when the twist on the experimental board next to the A/D potential, the top three digital tube shown in decimal, digital A<shejizhe08> 在 2025-07-22 上传 | 大小:1kb | 下载:0
[单片机(51,AVR,MSP430等)] da
说明:用单片机控制DAC0832芯片输出电流,让发光二级管D12由灭均匀变到最亮,再由最亮均匀熄灭。在最亮和最暗时使用蜂鸣器分别警报一声,完成整个周期时间控制在5S左右,循环变化。-DAC0832 chip microcontroller to control the output current, light emitting diode D12 from off the uniform change to the brightest, and then goes out from the brig<shejizhe08> 在 2025-07-22 上传 | 大小:1kb | 下载:0
[微处理器(ARM/PowerPC等)] STM32_USART
说明:这是一个基于STM32的串口实验代码,可以直接移植,调试通过-This is a code based on the STM32 serial experiments can be transplanted directly through debugging<feng> 在 2025-07-22 上传 | 大小:3.33mb | 下载:0
[单片机(51,AVR,MSP430等)] 1602
说明:实现1602第一行从左侧移入“Hello everyone!”同时第二行从右侧移入“Welcome to here!”,移入速度自定,然后停留在屏幕上。-1602 The first line moved from the left side of the " Hello everyone!" While the second line from the right side moved to the " Welcome to here!" , Moved to<shejizhe08> 在 2025-07-22 上传 | 大小:1kb | 下载:0
[单片机(51,AVR,MSP430等)] STM32_CAN
说明:基于STM32的CAN程序,可移植到相关项目使用-CAN program based on the STM32, portable<feng> 在 2025-07-22 上传 | 大小:14.72mb | 下载:0
[单片机(51,AVR,MSP430等)] STM32_I2C
说明:基于STM32的I2C实验,调试成功,可移植使用-Based on the STM32 I2C experiment, the successful commissioning, portable use<feng> 在 2025-07-22 上传 | 大小:1.35mb | 下载:0