资源列表

« 1 2 ... .99 .00 .01 .02 .03 24204.05 .06 .07 .08 .09 ... 33928 »

[嵌入式/单片机编程W5300_Drv_V1.2.3.zip

说明:W5300驱动,W5300_Drv_V1.2.3版本,W5300 driver, W5300_Drv_V1.2.3 version
<陈胜> 在 2025-07-26 上传 | 大小:33kb | 下载:0

[单片机(51,AVR,MSP430等)jiaotongdengTimer.rar

说明:51单片机IO口控制以及定时器的使用方法,控制LED灯循环点亮,或者模拟路*通灯的变化。,51 MCU IO port control, and the use of the timer, control LED lights cycle lit or analog junction traffic lights change.
<liupudu> 在 2025-07-26 上传 | 大小:13kb | 下载:0

[单片机(51,AVR,MSP430等)pwmbell.rar

说明:为51单片机的PWM控制模块以及定时器的模块使用,通过pwm控制响铃是否发声以及发声的时间长短等。,51 microcontroller PWM control module, and timer module pwm control the Bell whether voice, and sound duration.
<liupudu> 在 2025-07-26 上传 | 大小:9kb | 下载:0

[微处理器(ARM/PowerPC等)nr-fpcx-source.zip

说明:cc1020+atmega8 source code,cc1020+atmega8 source code
<youngil/kim> 在 2025-07-26 上传 | 大小:13kb | 下载:0

[微处理器(ARM/PowerPC等)UART_cc1020.zip

说明:uartcc1020 sourcecode,uartcc1020 sourcecode
<youngil/kim> 在 2025-07-26 上传 | 大小:7kb | 下载:0

[其他嵌入式/单片机内容ucGUI-3.90VC6.0.zip

说明:ucGUI3.9源码和在vc6.0下的仿真程序,ucGUI3.9 source code
<曾建玮> 在 2025-07-26 上传 | 大小:3.03mb | 下载:0

[VHDL编程doorlock.rar

说明:门锁 状态机 verilog 适用于digilent NEXYS2开发板,doorlock state machine verilog applied to digilent NEXYS2 board
<占建> 在 2025-07-26 上传 | 大小:2kb | 下载:0

[单片机(51,AVR,MSP430等)SnakeGame.rar

说明:基于C52的贪吃蛇游戏,本游戏采用红外遥控的方式进行游戏,液晶采用12864.,C52-based Snake game the game the game using the infrared remote control, LCD using 12864.
<王子杰> 在 2025-07-26 上传 | 大小:46kb | 下载:0

[VHDL编程uC_interface

说明:IIC总线微控制器的接口RTL代码(verilog)-the verilog code of IIC Uc_interface
<马凯英> 在 2025-07-26 上传 | 大小:3kb | 下载:0

[嵌入式/单片机编程GenericApp---gettemp

说明:这是一个简单的利用zigbee进行无线温度采集的程序,程序使用的芯片为CC2530,实验中将程序分别下载到协调器及终端节点即可从协调器的串口中读出温度值-This is a simple the zigbee wireless temperature acquisition program, and the program to use the chip CC2530 experiment will be the program are downloaded to the coordinator
<钟路强> 在 2025-07-26 上传 | 大小:8.96mb | 下载:0

[单片机(51,AVR,MSP430等)GenericApp---gettopology

说明:zigbee应用程序,可以获取组网后的zigbee网络地址及物理地址,从而获取网络的拓扑结构,分别将程序下载到协调器,路由器及终端结点中,组网成功后用串口住手向协调器发送topology即可获得各结点的网络地址及物理地址,程序中只设定了最多三块开发板组网,可自行修改以适应更多的开发板-zigbee applications, you can get the network after the zigbee network address and physical address in order
<钟路强> 在 2025-07-26 上传 | 大小:9.13mb | 下载:0

[嵌入式Linuxgprs

说明:基于飞凌公司OK6410开发板及GPRS模块编写的GPRS测试程序,使用的QT版本为QT4.7.1,可以实现的功能包括调试串口的选择,短信的发送及接收浏览,播打电话及接听或挂断电话,其中发送短信要借助外接键盘,只能发送英文短信-Written based the Feiling company OK6410 development board and GPRS module the GPRS test procedures, use of QT version QT4.7.1, function
<钟路强> 在 2025-07-26 上传 | 大小:6kb | 下载:0
« 1 2 ... .99 .00 .01 .02 .03 24204.05 .06 .07 .08 .09 ... 33928 »

源码中国 www.ymcn.org