资源列表

« 1 2 ... .66 .67 .68 .69 .70 26471.72 .73 .74 .75 .76 ... 33928 »

[DSP编程Speech-signal-transmission

说明:利用DSP的SPI同步串行接口驱动语音芯片,实现DSP和音频接口芯片之间的数据采集和传输。-The use of DSP SPI synchronous serial interface driver voice chip, chip DSP and audio interface between the data acquisition and transmission.
<yangdianshuai> 在 2025-11-06 上传 | 大小:57kb | 下载:0

[DSP编程Event-capture

说明:利用事件管理器EVA中捕获单元的捕获输入引脚检测两个事件变化的时间。(通过手动时间开关存数值)-Using the Event Manager EVA unit captured two events capture input pin to detect changes in time. (By manually switching time value stored)
<yangdianshuai> 在 2025-11-06 上传 | 大小:62kb | 下载:0

[单片机(51,AVR,MSP430等)STM32F1XX-FATFS-File-system

说明:支持STM32F103的裸跑文件系统,FATFS,易移植!-STM32F1XX-FATFS File system
<景波> 在 2025-11-06 上传 | 大小:41kb | 下载:0

[DSP编程SCI-serial-communication

说明:编程通过SCITXD和SCIRXD引脚以9600B每秒的波特率传送数据。设SCICCR置中的值,使SCI模块进行内部回送,即自发自收。-Programming through SCITXD and SCIRXD pin to 9600B baud per second data transfer. Let SCICCR set of values ​ ​ so that SCI module for internal loopback, ie spontaneous admi
<yangdianshuai> 在 2025-11-06 上传 | 大小:59kb | 下载:0

[DSP编程SPI-serial-communication

说明:利用2台DSP试验箱的SPI端口进行通信,编写程序通过一台DSP引脚JP2向另一台DSP实验箱传输数据,并储存到200H开始的连续存储区中-Use two sets DSP SPI port chamber communicates through a DSP programming JP2 pin test box to another DSP transmit data and save it to the beginning of a continuous 200H storage are
<yangdianshuai> 在 2025-11-06 上传 | 大小:59kb | 下载:0

[DSP编程send-and-receive-mail-from-eCAN

说明:用F2812DSP芯片内部的eCAN邮箱,进行自发收模式的通信,正确配置通信模式,保证正确传输,并接受存放在60H开始的连续内存单元中。-Inside the chip with F2812DSP eCAN mailbox reception mode for spontaneous communication, communication mode is configured correctly to ensure proper transfer and start accepting dep
<yangdianshuai> 在 2025-11-06 上传 | 大小:66kb | 下载:0

[其他嵌入式/单片机内容BSL-download

说明:MSP430程序烧录软件,简单快速方便-MSP430 procedures burning software, simple and quick and easy
<li> 在 2025-11-06 上传 | 大小:720kb | 下载:0

[其他嵌入式/单片机内容shumagua

说明:通过数码管和单片机的组合 制作成的数码管时钟程序-Through the combination of digital control and made ​ ​ into a single-chip digital clock program
<赵紫煜> 在 2025-11-06 上传 | 大小:2kb | 下载:0

[其他嵌入式/单片机内容MiniAHRS_PRO

说明:机器人姿态调整程序,用于机器人姿态平衡-Robot attitude adjustment program for the robot posture balance · · ·
<li> 在 2025-11-06 上传 | 大小:663kb | 下载:0

[其他嵌入式/单片机内容code

说明:低频信号处理系统,将多路低频信号输入,存储,进行叠加输出-Low-frequency signal processing system, the multi-frequency signal input, storage, be superimposed output
<shafahou> 在 2025-11-06 上传 | 大小:35kb | 下载:0

[单片机(51,AVR,MSP430等)digital-clock

说明:利用时钟芯片DS1302和LCD1602做的数字时钟,可以修改时钟。-The use of clock chip DS1302 and LCD1602 do digital clock that can modify the clock.
<huangxinjie> 在 2025-11-06 上传 | 大小:57kb | 下载:0

[嵌入式/单片机编程Keil

说明:程序名 :温度控制器程序 编写人 :zying 日 期 * 2012-1-24 HY-536开发板调试成功 带上限、下限控制,闪烁调整数字,调整范围0-99度。 温度低于设定下限启动到达上限停止,加、减按键兼开关。 利用DS18B20内部E2ROM保存上下限值。-程序名 :温度控制器程序 Cheng Xuming: temperature controller program 编写人 :zying 日 期* 2012-1-24 HY-536开发板调试成功 W
<zying> 在 2025-11-06 上传 | 大小:36kb | 下载:0
« 1 2 ... .66 .67 .68 .69 .70 26471.72 .73 .74 .75 .76 ... 33928 »

源码中国 www.ymcn.org