资源列表
[VHDL编程] fft_512
说明:采用Xilinx提供的VHDL FFT ip核实现512点FFT,可以实现使能控制、时钟控制等功能-Using Xilinx provides VHDL FFT ip core to achieve implementation of 512 points FFT, with enable control, clock control and other functions<Horace Sun> 在 2025-07-17 上传 | 大小:6.3mb | 下载:0
[单片机(51,AVR,MSP430等)] AD_Multich
说明:利用TI公司的MSP430F149单片机的片内AD,实现多通道AD数据采集和转换-Using TI MSP430F149 microcontroller s on-chip AD, realizing AD data acquisition and conversion of multi channel<Horace Sun> 在 2025-07-17 上传 | 大小:17kb | 下载:0
[单片机(51,AVR,MSP430等)] 18b20_1602
说明:利用TI公司的MSP430F149单片机,配合18B20温度传感器和1602液晶显示屏,实现实时环境温度显示-Using TI MSP430F149 microcontroller, with 18B20 temperature sensor and 1602 LCD screen, realizing real-time temperature display<Horace Sun> 在 2025-07-17 上传 | 大小:41kb | 下载:0
[VHDL编程] CIC_filter
说明:三级级联梳状滤波器(CIC)的verilog实现。顶层模块top_moduole下面包含三个子模块,积分模块integrated,抽取模块decimate和梳状滤波器模块comb,已验证可综合通过并实现CIC功能-Three-level cascade comb filter (CIC) verilog implementation.Top-level module top_moduole below contains three child module, integral module in<xuzigeng> 在 2025-07-17 上传 | 大小:2kb | 下载:0
[其他嵌入式/单片机内容] FREE
说明:C51编译器包. AVAIL指向第 可用块或者是NULL如果没有免费的 块。 ROVER是粗纱头指向 一个块中的某处列表.-C51 Compiler package .AVAIL points to the first available block or is NULL if there are no free blocks. ROVER is a roving header that points to a block somewhere in the list.<林立> 在 2025-07-17 上传 | 大小:1kb | 下载:0
[单片机(51,AVR,MSP430等)] i2c
说明:基于单片机超声波测距仪的实现,数据传输利用了i2c总线。-MCU-based implementations of ultrasonic range finder, data transmission use i2c bus.<闫军> 在 2025-07-17 上传 | 大小:1kb | 下载:0
[单片机(51,AVR,MSP430等)] ALIENTEK-MINISTM32
说明:本实验将实现如下功能:开机的时候先检测NRF24L01模块是否存在,在检测到NRF24L01模块之后,根据KEY0和KEY1的设置来决定模块的工作模式,在设定好工作模式之后,就会不停的发送/接收数据,同样用DS0来指示程序正在运行。-This experiment will achieve the following functions: start when the first detection NRF24L01 module exists, after detecting NRF24L01<闫军> 在 2025-07-17 上传 | 大小:100kb | 下载:0
[uCOS开发] ucosii_twotask
说明:ucos在lm3s9b92上的移植并且有两个作业验证移植成功-ucos lm3s9b92<陈涛> 在 2025-07-17 上传 | 大小:2.59mb | 下载:0
[DSP编程] INT_PRC
说明:对于DSP28335 中断模块寄存器组标准的寄存器配置,使用时无需重复配置寄存器可以将中断函数写入中断向量表-Standard set of registers with DSP28335 interrupt module configuration, do not need to repeat the configuration register when using the interrupt function can be written to interrupt to scale<金铭> 在 2025-07-17 上传 | 大小:569kb | 下载:0