资源列表

« 1 2 ... .71 .72 .73 .74 .75 30576.77 .78 .79 .80 .81 ... 33928 »

[VHDL编程coordinate-transformation

说明:实现坐标变换,包括clark和park变换,clark变换实现三相静止坐标转换到两相静止坐标,park变换实现两相静止坐标转换到两相旋转坐标-Achieve coordinate transformation, including clark and park transform, clarke transform phase static coordinate conversion to the two-phase stationary coordinate, park transform t
<cpf> 在 2025-07-08 上传 | 大小:1kb | 下载:0

[VHDL编程TLV5630ceshi

说明:TLV5630 DA转换芯片FPGA控制程序源代码,verilog编写-TLV5630 DA converter chip FPGA control program source code, verilog prepared
<陈照> 在 2025-07-08 上传 | 大小:3.33mb | 下载:0

[VHDL编程Lvbo

说明:实现信号滤波,可根据外部信号毛刺干扰的特点改变滤波时钟来改变滤波宽度-Achieve signal filtering, the filter can be changed according to the characteristics of the external clock signal glitch to change the filter width
<cpf> 在 2025-07-08 上传 | 大小:5kb | 下载:0

[VHDL编程Asy_slavefifo_rdwr(141027)

说明:FPGA 控制CY7C68013A芯片的收发程序,调试通过,最高速度18M-CY7C68013A chip transceiver FPGA control procedures, debugging through, the maximum speed of 18M
<陈照> 在 2025-07-08 上传 | 大小:12.97mb | 下载:0

[VHDL编程PWM-dead-zone

说明:实现PWM输出的死区控制,可保证避免上下桥臂同时导通损坏功率器件-Achieve PWM output dead time control, can guarantee to avoid simultaneous conduction of upper and lower leg damage power devices
<cpf> 在 2025-07-08 上传 | 大小:3kb | 下载:0

[VHDL编程uart_tras

说明:FPGA编写的串口发送程序,调试通过,分模块实现。-FPGA prepared by the serial transmission program, debugging through, sub-modules.
<陈照> 在 2025-07-08 上传 | 大小:697kb | 下载:0

[Windows CEPrinter

说明:windows ce embedsky 2440 printer sample
<ali> 在 2025-07-08 上传 | 大小:68kb | 下载:0

[VHDL编程SPWM1

说明:通过三角载波与正弦波的比较,实现SPWM调制算法,可应用与电机控制等领域-By comparing the triangular carrier wave and sine wave to achieve SPWM modulation algorithm can be applied to the motor control and other fields
<cpf> 在 2025-07-08 上传 | 大小:1.09mb | 下载:0

[Windows CETQAutoRun

说明:embedsky autorun sample s3c2440
<ali> 在 2025-07-08 上传 | 大小:45kb | 下载:0

[Windows CETQGPS

说明:embedsky gps sample code 2440
<ali> 在 2025-07-08 上传 | 大小:79kb | 下载:0

[Windows CETQRotateLCD

说明:embedsky 2440 sample lcd rotationg
<ali> 在 2025-07-08 上传 | 大小:63kb | 下载:0

[VHDL编程PI

说明:实现PI控制算法,通过调节比例积分参数可实现对不同应用的PI闭环控制-Realize PI control algorithm parameters by adjusting the proportional-integral PI closed-loop control can be achieved for different applications
<cpf> 在 2025-07-08 上传 | 大小:377kb | 下载:0
« 1 2 ... .71 .72 .73 .74 .75 30576.77 .78 .79 .80 .81 ... 33928 »

源码中国 www.ymcn.org