资源列表

« 1 2 ... .65 .66 .67 .68 .69 4270.71 .72 .73 .74 .75 ... 33928 »

[DSP编程DSPADfloat

说明:
<穆付强> 在 2025-11-20 上传 | 大小:2kb | 下载:0

[其他嵌入式/单片机内容uart

说明:ARM9的串口开发实例,其他的arm系列可以参考使用-ARM9 serial development of examples of other series can refer to the use of arm
<lg> 在 2025-11-20 上传 | 大小:536kb | 下载:0

[嵌入式/单片机编程key1

说明:嵌入式的简单测试程序,可以检验是否系统正常-Embedded simple test procedure, you can test whether the system of normal
<lg> 在 2025-11-20 上传 | 大小:478kb | 下载:0

[单片机(51,AVR,MSP430等)modbuspw

说明: build a modbus client/server for use on the Protocessor (from FieldServer Technologies) Tools Required: 1. Microchip MCC18 compiler. 2. ICD2 debugger (or other device to program your PIC) 3. Protocessor hardware.-build a modbus client/ser
<QQWang> 在 2025-11-20 上传 | 大小:38kb | 下载:0

[嵌入式/单片机编程dd

说明:Sbc2410的原理图,给需要的参考-Sbc2410 the schematic diagram, a reference to the need to
<lg> 在 2025-11-20 上传 | 大小:793kb | 下载:0

[VHDL编程fpga

说明:
<lg> 在 2025-11-20 上传 | 大小:1010kb | 下载:0

[嵌入式Linuxkeyboard

说明:基于S3C2410开发板,基于中断方式的键盘驱动程序-S3C2410 based development board, based on the interruption of the way the keyboard driver
<夏冬雪> 在 2025-11-20 上传 | 大小:2kb | 下载:0

[微处理器(ARM/PowerPC等)MPC860_SMC2_INIT

说明:微处理器MPC860的相关C程序-MPC860 microprocessor procedures related C
<费怀胜> 在 2025-11-20 上传 | 大小:107kb | 下载:0

[嵌入式Linuxboot071211.tar

说明:AT91RM9200的一级boot,以成功移植在自己的板子上,使用32M 三星内存-AT91RM9200 of a boot, to the success of transplantation in their own board, the use Samsung memory 32M
<baijing> 在 2025-11-20 上传 | 大小:98kb | 下载:0

[微处理器(ARM/PowerPC等)loader071211.tar

说明:at91rm9200的一级bootloader,已移植到自己的板子上了,适用32M内存-AT91RM9200 level bootloader, have been transplanted to their own board on the applicable 32M memory
<baijing> 在 2025-11-20 上传 | 大小:127kb | 下载:0

[单片机(51,AVR,MSP430等)any

说明:这个文件通过修改计时器初值,就可以实现任意占空比的波形输出,对单片机编程极有便利-The document by modifying the timer initial value, we can achieve arbitrary duty cycle of the waveform output of single-chip programming is very convenient
<riyu> 在 2025-11-20 上传 | 大小:21kb | 下载:0

[单片机(51,AVR,MSP430等)5123467

说明:51单片机编程器的全部资料,包括PCB,原理图,监控程序原代码,上位机软件,系统采用USB供电,串口数据传输编程,早些时候做成产品在卖呢,现在全部公开。-51 MCU programmer all the information, including the PCB, schematics, source code control procedures, PC software, system uses USB power supply, serial data transmission pro
<帅冲> 在 2025-11-20 上传 | 大小:581kb | 下载:0
« 1 2 ... .65 .66 .67 .68 .69 4270.71 .72 .73 .74 .75 ... 33928 »

源码中国 www.ymcn.org