资源列表
[其他嵌入式/单片机内容] bujindianjiyuanli
说明:利用按键控制步进电机正转,反转,加速,减速。驱动方式采用一相励磁。-Controlled stepper motor with the key forward, reverse, speed up, slow down. The drive mode using the one-phase excitation.<yugeyue> 在 2025-07-08 上传 | 大小:1kb | 下载:0
[其他嵌入式/单片机内容] isd4004
说明:利用isd4004-08芯片进行录音和放音,可以通过按键或者串口控制录放音。-Isd4004-08 chip for recording and playback, sound recording can be controlled by keys or serial.<yugeyue> 在 2025-07-08 上传 | 大小:1kb | 下载:0
[其他嵌入式/单片机内容] zhiliudianjiyuanli
说明:通过按键调节直流电机转速,同时在数码管上显示相应的转速。通过控制单片机输出不通过占空比的PWM信号来控制直流电机的转速值。-Button to adjust the DC motor speed, digital tube display of speed. Do not pass through the control of microcontroller output duty cycle PWM signal to control the DC motor speed value.<yugeyue> 在 2025-07-08 上传 | 大小:1kb | 下载:0
[微处理器(ARM/PowerPC等)] c8051f020AD
说明:c8051f202单片机的内部ADc程序-c8051f202 microcontroller internal ADc of the program<chenjiawei> 在 2025-07-08 上传 | 大小:1kb | 下载:0
[微处理器(ARM/PowerPC等)] GPIO
说明:GPIO support for freescale coldfire MCF5282<lolo> 在 2025-07-08 上传 | 大小:1kb | 下载:0
[单片机(51,AVR,MSP430等)] UART_MOTOR
说明:使用串口命令控制步进电机,在不同的速度下工作。-Using serial commands to control the stepper motor<陈岩霞> 在 2025-07-08 上传 | 大小:1kb | 下载:0
[单片机(51,AVR,MSP430等)] main
说明:基于msp430g2553的1602四线驱动-Driven based on the 1602 four-wire msp430g2553<王涛> 在 2025-07-08 上传 | 大小:1kb | 下载:0
[单片机(51,AVR,MSP430等)] bit_operation_support
说明:Several usefull macros for bit operation. Originally developped for MCF5282<lolo> 在 2025-07-08 上传 | 大小:1kb | 下载:0
[单片机(51,AVR,MSP430等)] c8051f126cfg
说明:c8051126单片机的初始化设置,包括频率,中断,IO端口等基本设置-c8051126 MCU initialization settings, including the basic settings of the frequency of interrupts, IO ports<kxl> 在 2025-07-08 上传 | 大小:1kb | 下载:0