资源列表

« 1 2 ... .66 .67 .68 .69 .70 23571.72 .73 .74 .75 .76 ... 33928 »

[单片机(51,AVR,MSP430等)M3C

说明:串口姿态模块,串口卡尔曼输出姿态模块M3C,将数据读出来并显示在Nokia5110液晶上-Serial attitude module, serial output Kalman attitude module M3C, will read out the data and displayed on the LCD Nokia5110
<黄英文> 在 2025-07-13 上传 | 大小:334kb | 下载:0

[单片机(51,AVR,MSP430等)PM2.5_GSM

说明:关于PM2.5与GSM的物联系统开发的源代码,有需要的同学可以看一下-About PM2.5 associated with the GSM system was developed source code, students need to be able to look at
<潘攀> 在 2025-07-13 上传 | 大小:334kb | 下载:0

[单片机(51,AVR,MSP430等)stm32-wireless

说明:STM32 实现的无线通信。stm32通过nfc24l01产生无线信号,另外一块接受并解析。-STM32 to realize wireless communication. Stm32 through nfc24l01 produce wireless signal, the other a accepted and parsing.
<xu> 在 2025-07-13 上传 | 大小:334kb | 下载:0

[其他嵌入式/单片机内容IRRemote

说明:Arduino接收紅外線 接收器測過TL1838 Arduino IDE 1.0.6以後要刪除libraries\RobotIRremote 不然編譯會失敗-Arduino measured before receiving infrared receiver TL1838 Arduino IDE 1.0.6 later deleted libraries \ RobotIRremote or compilation will fail
<鄭立揚> 在 2025-07-13 上传 | 大小:334kb | 下载:0

[VHDL编程EP1C3-uart_1_verilog

说明:EP1C3-uart_1_verilog,程序实现了一个收发一帧10个bit(即无奇偶校验位)的串口控制器,10个bit是1位起始位,8个数据位,1个结束位。 串口的波特律由程序中定义的div_par参数决定,更改该参数可以实现相应的波特率。程序当前设定的div_par 的值 是0x145,对应的波特率是9600。用一个8倍波特率的时钟将发送或接受每一位bit的周期时间划分为8个时隙以使通 信同步.-EP1C3-uart 1 verilog, implements a program
<davidobt> 在 2025-07-13 上传 | 大小:334kb | 下载:0

[单片机(51,AVR,MSP430等)PIC24_CAN2

说明: 使用MPLAB打开工程,实现两个PIC24双机CAN通信,主机按不同键发送数据,从机接受数据,根据接受到的不同数据点亮不同的小灯-Open the project using MPLAB achieve two dual-PIC24 CAN communication, different host key to send data, receive data the machine, according to different data received different small
<wangrongwei> 在 2025-07-13 上传 | 大小:334kb | 下载:0

[VHDL编程SensorTemperatura

说明:Temperature sensor of a FPGA nexys 4 on verilog languaje
<Andruans> 在 2025-07-13 上传 | 大小:334kb | 下载:0

[单片机(51,AVR,MSP430等)controller-project.

说明:简单几个按键可以实现模式,温度的设定,多种模式,多种智能方式可选。- 翻译关闭即时翻译 英语 中文 德语 检测语言 中文(简体) 英语 日语 简单几个按键可以实现模式,温度的设定,多
<黄爽> 在 2025-07-13 上传 | 大小:334kb | 下载:0

[VHDL编程lab4_2

说明:脉冲宽度测量,按下按键开始脉冲宽度的测量,并设计有复位溢出信号,采用状态机模块化设计方法-Pulse width measurement, press the button to start measuring the pulse width, and the design of the overflow reset signal, using the state machine Modular Design
<刘天> 在 2025-07-13 上传 | 大小:334kb | 下载:0

[单片机(51,AVR,MSP430等)1602-DS1302

说明:1602万年历,使用DS1302计时,基于51单片机,C语言源码-1602 calendar
<zhang> 在 2025-07-13 上传 | 大小:334kb | 下载:0

[VHDL编程project2

说明:关于verilog有限状态机的设计,可以供初学者对有限状态机的设计有初步了解-About verilog finite state machine design, finite state machine for beginners to have a preliminary understanding of the design
<mike> 在 2025-07-13 上传 | 大小:334kb | 下载:0

[单片机(51,AVR,MSP430等)111111

说明:基于单片机的液压控制 内含proteus仿真,代码 开发环境KEIL
<董园青> 在 2025-07-13 上传 | 大小:334kb | 下载:0
« 1 2 ... .66 .67 .68 .69 .70 23571.72 .73 .74 .75 .76 ... 33928 »

源码中国 www.ymcn.org