资源列表

« 1 2 ... .77 .78 .79 .80 .81 3482.83 .84 .85 .86 .87 ... 33928 »

[其他嵌入式/单片机内容sda

说明:简单的时钟程序大家需要的-Simple clock procedures we need
<> 在 2025-11-05 上传 | 大小:2kb | 下载:0

[VHDL编程24clock

说明:实现60进制的计数,每60个脉冲上升沿进一次位。-60 M
<李家兴> 在 2025-11-05 上传 | 大小:2kb | 下载:0

[单片机(51,AVR,MSP430等)shumaguangps

说明:数码管GPS显示,在单片机上实现的,可以参考一下-GPS digital tube display, in the realization of single-chip, you can refer to
<cai> 在 2025-11-05 上传 | 大小:2kb | 下载:0

[VHDL编程ram

说明:存储器模块生成,采用16位数据总线,5位读写地址总线,异步清零!-Memory modules generated, using 16-bit data bus, 5 to read and write address bus, asynchronous Clear!
<齐磊> 在 2025-11-05 上传 | 大小:2kb | 下载:0

[单片机(51,AVR,MSP430等)153

说明:舞台灯光控制-Stage lighting control
<yuku> 在 2025-11-05 上传 | 大小:2kb | 下载:0

[单片机(51,AVR,MSP430等)multitask

说明:多任务及任务间通信。由任务得到consle的命令,再将需要作出的回答传递给下一个任务输出。出错报警-Multi-tasking and communication tasks. Consle by the task orders received, and then answer the need for transmission to the next task of the output. Error alarm
<jlb> 在 2025-11-05 上传 | 大小:2kb | 下载:0

[单片机(51,AVR,MSP430等)T6963C_lcd_Drive

说明:基于T6963C控制器显示屏的驱动程序,可用于12864黑白屏的控制-T6963C controller based on the display driver can be used for the control of 12,864 black-and-white screen
<郑文德> 在 2025-11-05 上传 | 大小:2kb | 下载:0

[单片机(51,AVR,MSP430等)read90

说明:此程序用来读IBUTTON TM卡的唯一序列号-This procedure used to read only IBUTTON TM card serial number
<陈明> 在 2025-11-05 上传 | 大小:2kb | 下载:0

[单片机(51,AVR,MSP430等)bin2s19

说明:能将BIN文件格式转成飞思卡尔默认的S19格式-BIN file formats can be converted into Freescale S19 default format
<陈志> 在 2025-11-05 上传 | 大小:2kb | 下载:0

[嵌入式/单片机编程c++

说明:简单计算器的源代码可以实现加减乘除的计算。 -Simple calculator source code can be achieved Math
<张昱> 在 2025-11-05 上传 | 大小:2kb | 下载:0

[单片机(51,AVR,MSP430等)ADC

说明:将AIN0.0的输入值(电压)转换为12位数字量,保存在片内外部存储器XRAM中,本程序对应的处理器为C8051f020单片机。-Will AIN0.0 input value (voltage) is converted to 12-digit volume, stored in external memory-chip XRAM, this procedure corresponds to single-chip processors for the C8051F020.
<王沛荣> 在 2025-11-05 上传 | 大小:2kb | 下载:0

[VHDL编程LPT

说明:实现开漏输出的并口,支持3.3V或5V,支持FPGA 的PS 配置功能。8位配置数据 自动移位输出,输入时钟24MHz,产生1MHz配置时钟。8位CPU数据总线接口, 11位地址总线。支持IO 的置位清除功能。-The realization of open-drain output of the parallel port, support 3.3V or 5V, support for FPGA configuration of the PS function. 8-bit conf
<tianrongcai> 在 2025-11-05 上传 | 大小:2kb | 下载:0
« 1 2 ... .77 .78 .79 .80 .81 3482.83 .84 .85 .86 .87 ... 33928 »

源码中国 www.ymcn.org