资源列表

« 1 2 ... .26 .27 .28 .29 .30 5231.32 .33 .34 .35 .36 ... 33928 »

[其他嵌入式/单片机内容DDS_ad9851_s

说明:基于89C52和DDS芯片AD9851的串行方式控制-Based on the 89C52 and the DDS chip AD9851 serial control
<鲍园> 在 2025-11-23 上传 | 大小:3kb | 下载:0

[嵌入式/单片机编程spi

说明:spi atmega128available use gcc avrstudio
<jeon ki hong> 在 2025-11-23 上传 | 大小:3kb | 下载:0

[VHDL编程IICVHDL

说明:IIC,给予VHDL的IIC的实现,很好的资料-NO
<dalianmao502> 在 2025-11-23 上传 | 大小:3kb | 下载:0

[DSP编程i2c

说明:基于DSP6713的IIC编程,希望对大家有用!-DSP6713 programming based on the IIC, in the hope that useful!
<李志海> 在 2025-11-23 上传 | 大小:3kb | 下载:0

[嵌入式/单片机编程temp-clock

说明:基于AVR单片机1602液晶显示程序,带DS1302的时间维持芯片 -Based on the 1602 single-chip LCD AVR procedures, with time-keeping chip DS1302
<Tomato.King> 在 2025-11-23 上传 | 大小:3kb | 下载:0

[VHDL编程coslist

说明:cos表值寄存器,1024点,10位地址,10位数据-the list of cos,1024 points,10 bits of address, 10 bits of data
<liufei> 在 2025-11-23 上传 | 大小:3kb | 下载:0

[VHDL编程frecount

说明:基于vhdl的频率计控制器模块设计,已经经过调试,可直接调用-Vhdl based on the frequency of the controller module design, debugging has been directly call
<郭帅> 在 2025-11-23 上传 | 大小:3kb | 下载:0

[嵌入式/单片机编程4SPI

说明:初始化并驱动LCD屏, 初始化并驱动LCD屏-inital ang driver lcd
<王海涛> 在 2025-11-23 上传 | 大小:3kb | 下载:0

[VHDL编程serial

说明:该程序用vhdl 编写,模拟串口工作,对上位机发送数据在串口调试工具下显示,接受上位机数据在数码管上显示-Vhdl prepared to use the program to simulate the serial port work, send data to the PC serial port debug tools in the next showed that IPC data in digital tube display
<gjp_rain> 在 2025-11-23 上传 | 大小:3kb | 下载:0

[单片机(51,AVR,MSP430等)5Vdyb

说明:5V电压测量源程序,采用AD0809芯片,液晶显示,有上下限报警-5V source voltage measurement, the AD0809 chips, liquid crystal display, there are upper and lower limits alarm
<zhao> 在 2025-11-23 上传 | 大小:3kb | 下载:0

[单片机(51,AVR,MSP430等)85_11

说明:
<cui> 在 2025-11-23 上传 | 大小:3kb | 下载:0

[微处理器(ARM/PowerPC等)main

说明:基于powerpc的AD7873的触摸屏的控制-Powerpc the AD7873-based touch-screen control
<王宗昊> 在 2025-11-23 上传 | 大小:3kb | 下载:0
« 1 2 ... .26 .27 .28 .29 .30 5231.32 .33 .34 .35 .36 ... 33928 »

源码中国 www.ymcn.org