资源列表
[嵌入式/单片机编程] ARM_INC
说明:这是我个人再学习ARM7s3c2410的 时候用到的试验代码,都是再我机器上面条通过 ,这里给出一些必要的头文件。还有试验用到的苦文件-This is my personal study again ARM7s3c2410 the time to use the test code, I machines are more of the above, here is some of the necessary header files. The pilot also used the hards<zc> 在 2025-06-09 上传 | 大小:5kb | 下载:0
[其他嵌入式/单片机内容] ha0095
说明:HT46R14单相交流感应马达变频器程序说明及源程序-HT46R14 single-phase AC induction motor and the inverter descr iption of the procedures source<> 在 2025-06-09 上传 | 大小:5kb | 下载:0
[嵌入式Linux] PARPORT_s3c2410
说明:我为S3C2410写的扩展并口驱动程序,已经编译运行通过,附带内核配置文件。-S3C2410 I write for the expansion of parallel drivers, has been running through the compiler, kernel configuration file attached.<贺亚龙> 在 2025-06-09 上传 | 大小:5kb | 下载:0
[DSP编程] uart1
说明:使用DSP软件实现UART功能.一般教科书上提供的UART收发的程序往往是一段采用轮循(Polling)方式完成收发的简单代码。但对于高速的AVR来讲,采用这种方式大大降低了 MUC的效率。在使用AVR时,应根据芯片本身的特点(片内大容量数据存储器RAM,更适合采用高级语言编写系统程序),编写高效可靠的UART收发接口(低层)程序。下面是一个典型的USART的接口程序。-use DSP software UART functions. General textbooks UART transce<张倩> 在 2025-06-09 上传 | 大小:5kb | 下载:0
[单片机(51,AVR,MSP430等)] 微型打印机实验程序清单
说明:微型打印机实验程序清单.rar,仅适用于MCS51系列单片机编程-Micro Printer experimental procedure list. Rar, applies only to MCS51 Series MCU Programming<沈楚苗> 在 2025-06-09 上传 | 大小:5kb | 下载:0
[单片机(51,AVR,MSP430等)] 步进电机控制实验程序清单
说明:步进电机控制实验程序清单(mcs51系列,doc格式)-experimental procedure list (mcs51 series, doc format)<沈楚苗> 在 2025-06-09 上传 | 大小:5kb | 下载:0
[单片机(51,AVR,MSP430等)] 07ad11
说明:ICCAVR编译器下的ATmega16芯片的AD使用范例。使用C语言编写,把通过中断方式的AD采集到的值送到串口。-ICCAVR compiler under the ATmega16 chips use AD model. The use of C language, the adoption of the AD interrupt processing of value to the serial.<韩兆伟> 在 2025-06-09 上传 | 大小:5kb | 下载:0
[单片机(51,AVR,MSP430等)] bcd_conv
说明:convert.asm: 1.From ASCII resp. BCD to binary 2.From binary to ASCII resp. BCD 3.From binary to Hex-ASCII Bin_Bcd.c: uchar BcdToBin(uchar val) uchar BinToBcd(uchar val) -convert.asm : 1.From ASCII resp. BCD 2.From binary to binary t o AS<jack> 在 2025-06-09 上传 | 大小:5kb | 下载:0