资源列表
[嵌入式/单片机编程] F33x_External_Interrupts
说明:C8051F330的外部中断程序。用silicon的开发环境运行-C8051F330 procedures of the external interrupt.<etherw> 在 2025-07-19 上传 | 大小:2kb | 下载:0
[嵌入式/单片机编程] F50x_Timer0_two_8bitTimers
说明:C8051F 定时器控制测试程序,可以用来检测定时器计数器是否正常-C8051F timer control testing procedures, can be used to detect whether the normal timer counter<sionmad> 在 2025-07-19 上传 | 大小:2kb | 下载:0
[嵌入式/单片机编程] F93x_UART0_STDIO
说明:This program demonstrates how to configure the C8051F930 to use routinesin STDIO.h to write to and read from the UART interface. The program reads a character using the STDIO routine getkey(), outputs that characterto the screen, and then outputs the<esidentMoha> 在 2025-07-19 上传 | 大小:2kb | 下载:0
[嵌入式/单片机编程] fcs
说明:HDLC FCS 源码 ,PIC C30-HDLC FCS source, PIC C30<intheirtra> 在 2025-07-19 上传 | 大小:2kb | 下载:0
[嵌入式/单片机编程] fifo_datapath
说明:verilog实现,串转并通过fifo再并转串,可以满足输入速率自由输出的一半时,输出仍可持续发送-verilog achieved, and through serial switch and switch again fifo Series, Rate free importation to meet half of the output, the output is still sustainable Send<dropins> 在 2025-07-19 上传 | 大小:2kb | 下载:0
[其他嵌入式/单片机内容] Example_2833x_Flash_to_RAM_nonBIOS
说明:TMS320F28335 Flash Upload<bang> 在 2025-07-19 上传 | 大小:2kb | 下载:0
[微处理器(ARM/PowerPC等)] SJA1000
说明:CAN 总线 SJA1000 芯片 驱动程序-CAN BUS SJA1000 Driver<孙圣贤> 在 2025-07-19 上传 | 大小:2kb | 下载:0
[单片机(51,AVR,MSP430等)] ad9984_YUV
说明:做项目用单片机配置的ad9984代码,此部分是用芯片的YUV输入端,将YUV信号转换为 4:2:220bit给后级使用,因为涉及项目只贴出ad9984_YUV配置部分。-Do projects MCU configuration ad9984 code, this part is YUV input of the chip, the signal is converted to 4:2:220 bit YUV to use after the class, because it involves<chenchuanlong> 在 2025-07-19 上传 | 大小:2kb | 下载:0