资源列表
[其他嵌入式/单片机内容] ADC_of_MSP430F249
说明：A single sample is made on A10 with reference to internal 1.5V Vref. Software sets ADC12SC to start sample and conversion - ADC12SC automatically cleared at EOC. ADC12 internal oscillator times sample and conversio<sattarhastam> 在 2025-05-20 上传 | 大小：1kb | 下载：0
[其他嵌入式/单片机内容] TimerA_of_MSPF249
说明：Toggle P1.0 using software and the TA_0 ISR. Timer_A is configured for up mode, thus the timer overflows when TAR counts to CCR0. In this example, CCR0 is loaded with 1000-1. ACLK = TACLK = INCLK = 32768Hz, MCLK =<sattarhastam> 在 2025-05-20 上传 | 大小：1kb | 下载：0
[其他嵌入式/单片机内容] I2C_of_MSP430F249
说明：This demo connects two MSP430 s via the I2C bus. The master reads 5 bytes the slave. This is the MASTER CODE. The data the slave transmitter begins at 0 and increments with each transfer. The USCI_B0 RX interrupt i<sattarhastam> 在 2025-05-20 上传 | 大小：1kb | 下载：0
[其他嵌入式/单片机内容] SPI_of_MSP430F249
说明： SPI master talks to SPI slave using 3-wire mode. Incrementing data is sent by the master starting at 0x01. Received data is expected to be same as the previous transmission TXData = RXData-1. USCI RX ISR is use<sattarhastam> 在 2025-05-20 上传 | 大小：1kb | 下载：0
[其他嵌入式/单片机内容] UART_of_MSP430F249
说明： Echo a received character, RX ISR used. Normal mode is LPM0. USCI_A0 RX interrupt triggers TX Echo. Baud rate divider with 1MHz = 1MHz/19200 = ~52.1 ACLK = n/a, MCLK = SMCLK = CALxxx_1MHZ = 1MHz<sattarhastam> 在 2025-05-20 上传 | 大小：1kb | 下载：0
[其他嵌入式/单片机内容] FLASH_WRITE_of_MSP430
说明： This program first erases flash seg C, then it increments all values in seg C, then it erases seg D, then copies seg C to seg D. Seg C @ 1040h Seg D @ 1000h The EEI bit is set for the Flash Erase Cycles. This does<sattarhastam> 在 2025-05-20 上传 | 大小：1kb | 下载：0
[单片机(51,AVR,MSP430等)] xiaoche
说明：自动循迹小车 测速 可检测金属 LCD显示路程时间-Automatic tracking car can detect metal LCD display distance<冯立彬> 在 2025-05-20 上传 | 大小：37kb | 下载：0
[其他嵌入式/单片机内容] zephyr_sensor
说明：基于Zephyr v1.7.0开发的MPU6050 sensor读取程序，MPU6050的驱动位置zephyr目录zephyr-v1.7.0/drivers/sensor/mpu6050-MPU6050 sensor application base on Zephyr v1.7.0, the MPU6050 driver is under zephyr-v1.7.0/drivers/sensor/mpu6050<韦伯> 在 2025-05-20 上传 | 大小：1kb | 下载：0
[其他嵌入式/单片机内容] zephyr_thread
说明：threads, semaphore and interrupt application on zephyr，按下按键后能够区分长按或者短按，并通过semaphore让相应thread得以继续运行，通过串口和LED显示长按和短按结果-threads, semaphore and interrupt application on zephyr, the application can recognize hold and short pr<韦伯> 在 2025-05-20 上传 | 大小：1kb | 下载：0
[其他嵌入式/单片机内容] Temperature_Alarm
说明：基于51单片机和C语言的温度报警器的设计，可手动设置温度- U57FA u5351 u5355 u7247 u7A8 u7B3 u7B0<吴厚有> 在 2025-05-20 上传 | 大小：3kb | 下载：0
[单片机(51,AVR,MSP430等)] CSBP1602
说明：利用超声波测距并将测量结果显示在1602液晶屏上。-The ultrasonic measurement results are displayed on the 1602 LCD screen.<419542787> 在 2025-05-20 上传 | 大小：38kb | 下载：0
[单片机(51,AVR,MSP430等)] 32.NRF24L01PLCD12864
说明：nrf2401收发程序，并在12864液晶进行显示。-The nrf2401 transceiver, which is shown in 12864 LCD.<419542787> 在 2025-05-20 上传 | 大小：117kb | 下载：0