资源列表
[VHDL编程] myshizhong
说明:该程序实现一个数字钟,带调整时间功能,在调整时间时,对应的位置闪烁显示。 CLR 为清零端,该键为‘1’时,时钟显示”000000“; EN 计数使能端,该键为‘1’时,时钟停止; MODE 模式选择按钮,在4种模式下循环:正常-小时调整-分调整-秒调整。 INC 调整时间按钮,该键为‘1’时,对应位置加1;-The program realization of a digital clock, adjust the time zone feature, adjust time,<李东> 在 2025-11-05 上传 | 大小:673kb | 下载:0
[VHDL编程] gff_int_mul
说明:application of a galois field multiplication and normal multiplication<> 在 2025-11-05 上传 | 大小:178kb | 下载:1
[微处理器(ARM/PowerPC等)] BootLoader_CID
说明:LPC2134的bootloader , 请用ADS查看地址设定。-LPC2134<lrlfriend> 在 2025-11-05 上传 | 大小:320kb | 下载:0
[微处理器(ARM/PowerPC等)] my_bt
说明:一个简单明了的用按键点亮LED的驱动(SBC2410),非常适合驱动入门-With a simple button lit LED driver (SBC2410), is ideal for entry-drive<朱国正> 在 2025-11-05 上传 | 大小:1kb | 下载:0
[微处理器(ARM/PowerPC等)] 2407
说明:TMS320LF2407驱动步进电机程序-TMS320LF2407 stepper motor-driven procedures<dadong> 在 2025-11-05 上传 | 大小:2kb | 下载:0
[VHDL编程] Verilog_example
说明:本文件包括多路选择器器建模,译码器实验程序,加法器实验程序,比较器实验程序,计数器建模,I2C接口标准建模源码,串行接口RS232标准建模源码标准,LCM建模源码,时钟6分频源码,串并转化源码。 ,对于硬件设计初学者来说有一定的参考价值。-This document includes MUX device modeling, experimental procedure decoder, adder experimental procedures, experimental procedur<朱秋玲> 在 2025-11-05 上传 | 大小:1.02mb | 下载:0
[微处理器(ARM/PowerPC等)] Infrared_decode
说明:Infrared remote decode firmware ,use time measure pulse to decode 1 or 0 this code can decode Nec protocal remote controller and than use uart transfer the data to the pc serial port<郭福珍> 在 2025-11-05 上传 | 大小:3kb | 下载:0
[单片机(51,AVR,MSP430等)] ps2keyboard2lcd
说明:在cypress晶片上實驗讀取ps2 keyboard按鍵後顯示在lcd上,同時利用I2C寫入EEPROM-In the cypress chip experiment after reading ps2 keyboard keys displayed on the lcd, while the use of I2C write EEPROM<jack> 在 2025-11-05 上传 | 大小:54kb | 下载:0
[单片机(51,AVR,MSP430等)] shanshuodeng
说明:基于51单片机的闪烁灯实验,主要熟悉单片机方面的c语言编程,初学者可以仔细研究研究。-Based on 51 experimental SCM flashing lights, the main aspects of familiar Singlechip c language programming, beginners and be more careful studies.<昭泊> 在 2025-11-05 上传 | 大小:2kb | 下载:0