资源列表

« 1 2 ... .18 .19 .20 .21 .22 29423.24 .25 .26 .27 .28 ... 33928 »

[单片机(51,AVR,MSP430等)mcs-51

说明:通信协议:第1字节,MSB为1,为第1字节标志,第2字节,MSB为0,为非第一字节标志,其余类推……,最后一个字节为前几个字节后7位的异或校验和。 测试方法:可以将串口调试助手的发送框写上 95 10 20 25,并选上16进制发送,接收框选上16进制显示,如果每发送一次就接收到95 10 20 25,说明测试成功。 下载C的源程序: -Communication protocol: the first 1 byte, MSB is 1, 1 byte for the first s
<刘周同> 在 2025-11-07 上传 | 大小:3kb | 下载:0

[uCOS开发ucosii2.76

说明:ucosII的内核程序,装载完板级支持bsb后再交叉编译完这个后即可运行ucos-ucosII kernel procedures, loading END bsb board-level support and then cross-compiled to run after the End of the uCOS
<h> 在 2025-11-07 上传 | 大小:65kb | 下载:0

[单片机(51,AVR,MSP430等)taiyang

说明:很实用的太阳能小夜灯 供電2V,充電電池為兩個1.2V並聯,J3並接4個高亮LED. 太陽能電池2V 充電電池1.2V 900mAh D1 1N5817TB Q1 Q4 S9013 Q2 S9014 Q3 S9015 R1 2M R2 3.3M R3 68K R4 6.8K R5 560 -Nightlight practical solar-powered 2V, two 1.2V rechargeable batteries in parallel, J3 and then four h
<ff8zgs> 在 2025-11-07 上传 | 大小:46kb | 下载:0

[嵌入式/单片机编程sdCARDOPER

说明:sd卡底层的操作子程序,包括硬件SPI实现的读写子程序以及软件模拟SPI的读写子程序-sd card underlying the operation of subroutines, including hardware SPI realize the read and write subroutines, and software simulation of the read and write SPI subroutine
<123> 在 2025-11-07 上传 | 大小:3kb | 下载:0

[微处理器(ARM/PowerPC等)chick

说明:一个小游戏,适合初学者 在ARM3000下运行-A small game, suitable for beginners in the running ARM3000
<liming> 在 2025-11-07 上传 | 大小:1.86mb | 下载:0

[单片机(51,AVR,MSP430等)please

说明:基于单片机c51的开发程序,温度采集系统,开发-C51-based single-chip development process, the temperature acquisition system, development
<cici> 在 2025-11-07 上传 | 大小:7kb | 下载:0

[DSP编程DSP28_CLOCK

说明:时钟芯片 DS1302 在DSP(2812)环境下的驱动程序-DS1302 clock chip in the DSP (2812) environment driver
<Andy tan> 在 2025-11-07 上传 | 大小:2kb | 下载:0

[uCOS开发BORLANDC

说明:将UC\OS与UCGUI整合到一起,并在BORLAND C++上运行通过的源程序.-UCOS UCGUI will be integrated together with, and BORLAND C++ Run through of the source.
<张成> 在 2025-11-07 上传 | 大小:14.76mb | 下载:0

[嵌入式LinuxexchangeparametersbetweenBootLoaderandLinuxcore.ra

说明:本文介绍了嵌入式系统 BootLoader与 Linux-2.6.19.2内核参数传递的具体实现。主 要内容包括:系统硬件平台的简介,参数链表的结构和创建,内核的接收。-This paper introduces the BootLoader embedded systems with Linux-2.6.19.2 kernel parameter specific realize. The main contents include: system hardware platform pr
<呆牛> 在 2025-11-07 上传 | 大小:163kb | 下载:0

[嵌入式/单片机编程transplantYAFFSFileSystem

说明:yaffs文件系统的移植,包括源码以及说明文件,详细讲述移植过程-transplantation yaffs file system, including source code and documentation to describe in detail the process of organ transplant
<呆牛> 在 2025-11-07 上传 | 大小:559kb | 下载:0

[uCOS开发uCGUIchinesemanul

说明:uC/GUI中文手册,讲述有关uC/GUI的一切-uC/GUI Chinese manual about uC/GUI all
<呆牛> 在 2025-11-07 上传 | 大小:4.75mb | 下载:0

[uCOS开发serialportprogramunderucosii

说明:串口程序,植到MCS51的uCOS_II,用uV2来运行的。没有提供uV2,需要的话, 到网上下载一个。-Serial procedures MCS51-sik to the uCOS_II, used to run the uV2. Did not provide uV2, if necessary, by downloading a.
<呆牛> 在 2025-11-07 上传 | 大小:184kb | 下载:0
« 1 2 ... .18 .19 .20 .21 .22 29423.24 .25 .26 .27 .28 ... 33928 »

源码中国 www.ymcn.org