资源列表
[单片机(51,AVR,MSP430等)] HYF_24J
说明:红外遥控键盘的驱动程序 由凌阳单片机SPCE061A驱动-Infrared remote control keyboard driver driven by Sunplus Singlechip SPCE061A<xia zhou> 在 2025-10-11 上传 | 大小:32kb | 下载:0
[嵌入式/单片机编程] FLASH_OPER
说明:FlashROM的存储控件操作源代码,用于在Ram中建立Flash映射Buf,减少直接操作Flash次数-FlashROM storage source code control operation for the Ram to build Flash mapping Buf, reducing direct operating Flash Views<XuJiaye> 在 2025-10-11 上传 | 大小:3kb | 下载:0
[单片机(51,AVR,MSP430等)] report_of_sd_mmc_reader1
说明:51单片机读写SD_MMC卡设计报告--本文件介绍了在51平台通过SPI方式读写SD/MMC卡,包括软硬件需求, SD/MMC硬件连接, SPI接口软件模拟,SD/MMC上电初始化,写单块,读单块,写多块,读多块,块擦除,上位串口通讯协议,PC上位软件操作说明等。-51 Single-chip design report card reader SD_MMC This document presents the platform of the 51 way through the SPI rea<6756> 在 2025-10-11 上传 | 大小:228kb | 下载:0
[单片机(51,AVR,MSP430等)] ZJ
说明:次程序为在89S52中对红外遥控的解码程序,该程序准确无误,解码程序用汇编,主体用C,实现了C+汇编的完美结合。特与大家分享。-Meeting procedures for the 89S52 of infrared remote control decoding procedure that is accurate, decoding process with the compilation, the main use of C, the realization of the C+ Compi<Z> 在 2025-10-11 上传 | 大小:21kb | 下载:0
[单片机(51,AVR,MSP430等)] MAX7219
说明:用keil软件编写的MAX72198位数码管显示驱动-Keil software used to prepare the MAX72198-bit digital tube display driver<Zeng jinqiang> 在 2025-10-11 上传 | 大小:21kb | 下载:0
[单片机(51,AVR,MSP430等)] ADS7818
说明:TI公司ADS7818的驱动代码,使用keil软件编写<Zeng jinqiang> 在 2025-10-11 上传 | 大小:36kb | 下载:0
[单片机(51,AVR,MSP430等)] AD9225
说明:用keil编写高速AD AD9225的工程文件,-Keil prepared using high-speed AD AD9225 engineering documents,<Zeng jinqiang> 在 2025-10-11 上传 | 大小:45kb | 下载:0
[嵌入式Linux] yampp7_usb_color
说明:DIY自己的MP3的参考价值极高的代码。含有详细的解释-DIY own MP3 high reference value to the code. Contain a detailed explanation<Zeng jinqiang> 在 2025-10-11 上传 | 大小:209kb | 下载:0
[微处理器(ARM/PowerPC等)] tr_wave
说明:FPGA编写的三角波发生器,可以产生100HZ~500KHZ以上的三角波,波形稳定-FPGA prepared triangular wave generator, can produce more than 100HZ ~ 500KHZ triangle wave, waveform stability<Zeng jinqiang> 在 2025-10-11 上传 | 大小:489kb | 下载:0
[单片机(51,AVR,MSP430等)] test14_motor_advance
说明:基于aduc845的步进电机控制程序,可以通过键盘使得电机正反向,加减速,停止,启动等。-Based on the ADuC845 the stepper motor control program can be made through the keyboard to the electrical positive and negative, deceleration, stop, start, and so on.<jinqiu> 在 2025-10-11 上传 | 大小:19kb | 下载:0
[单片机(51,AVR,MSP430等)] AD2
说明:基于aduc845的ad0809控制程序-ADuC845 the ad0809-based control procedures<jinqiu> 在 2025-10-11 上传 | 大小:26kb | 下载:0